Yep - same address.

Amplex
27800 Lemoyne, Ste F
Millbury, OH 43447

I found a SyncPipe Basic still in the shrink wrap.  On it’s way.

   1Z59YW640393806068

Mark


> On Nov 29, 2014, at 8:52 PM, Josh Luthman via Af <[email protected]> wrote:
> 
> Nah I was going to pay for overnight, this saves me a ton.  Much appreciated 
> man.
> 
> Does yours go to your signature address?
> 
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
> 
> On Nov 29, 2014 7:58 PM, "Mark Radabaugh via Af" <[email protected] 
> <mailto:[email protected]>> wrote:
> No problem - I have lots of those.   If you need it before Tuesday let me 
> know.
> 
> Mark
> 
> 
>> On Nov 29, 2014, at 7:27 PM, Josh Luthman via Af <[email protected] 
>> <mailto:[email protected]>> wrote:
>> 
>> I think just a syncpipe basic.  It's just going to two syncinjectors.
>> 
>> Josh Luthman
>> Office: 937-552-2340 <tel:937-552-2340>
>> Direct: 937-552-2343 <tel:937-552-2343>
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>> 
>> On Nov 29, 2014 7:10 PM, "Mark Radabaugh via Af" <[email protected] 
>> <mailto:[email protected]>> wrote:
>> Josh,
>> 
>> Sure - let me know which one you need.   I didn’t follow all of this thread. 
>>  
>> 
>> Mark
>> 
>> 
>>> On Nov 29, 2014, at 5:11 PM, Josh Luthman via Af <[email protected] 
>>> <mailto:[email protected]>> wrote:
>>> 
>>> Would you mind shipping it to me?
>>> 
>>> I can order one from Packetflux Monday and deliver it to your address?
>>> 
>>> 
>>> Josh Luthman
>>> Office: 937-552-2340 <tel:937-552-2340>
>>> Direct: 937-552-2343 <tel:937-552-2343>
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>> 
>>> On Sat, Nov 29, 2014 at 5:07 PM, Mark Radabaugh via Af <[email protected] 
>>> <mailto:[email protected]>> wrote:
>>> I have a bunch of them in the shop if you need one.
>>> 
>>> Mark Radabaugh
>>> Amplex
>>> 27800 Lemoyne, Ste F
>>> Millbury, OH 43447
>>> 419-261-5996 <tel:419-261-5996>
>>> 
>>> On Nov 29, 2014, at 4:55 PM, Josh Luthman via Af <[email protected] 
>>> <mailto:[email protected]>> wrote:
>>> 
>>>> So I just got back...fuse popped on that SyncInjector.  Not sure why.  
>>>> There was a Ubnt Beam on it - the cable was moved to the POE injector and 
>>>> fuse replaced.  SyncInjector is working as expected right now.
>>>> 
>>>> Sure hoping Forrest can do next day shipping on Monday =)
>>>> 
>>>> 
>>>> Josh Luthman
>>>> Office: 937-552-2340 <tel:937-552-2340>
>>>> Direct: 937-552-2343 <tel:937-552-2343>
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>> 
>>>> On Sat, Nov 29, 2014 at 3:39 PM, Forrest Christian (List Account) via Af 
>>>> <[email protected] <mailto:[email protected]>> wrote:
>>>> See http://tickets.packetflux.com/kb/faq.php?id=2 
>>>> <http://tickets.packetflux.com/kb/faq.php?id=2>
>>>> 
>>>> 6 blinks = power missing/too low.   
>>>> 
>>>> And yes, you need a syncpipe.
>>>> 
>>>> -forrest
>>>> 
>>>> On Fri, Nov 28, 2014 at 6:46 PM, Josh Luthman via Af <[email protected] 
>>>> <mailto:[email protected]>> wrote:
>>>> Here's a video, not sure what the blinking means?
>>>> 
>>>> https://www.youtube.com/watch?v=dME8A-H_590 
>>>> <https://www.youtube.com/watch?v=dME8A-H_590>
>>>> 
>>>> 
>>>> Josh Luthman
>>>> Office: 937-552-2340 <tel:937-552-2340>
>>>> Direct: 937-552-2343 <tel:937-552-2343>
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>> 
>>>> On Fri, Nov 28, 2014 at 8:39 PM, Josh Luthman via Af <[email protected] 
>>>> <mailto:[email protected]>> wrote:
>>>> *rb2011 with ports 2/3/4/5 set to hardware switch (ether2 master, 3/4/5 
>>>> slave).  Ports 6/7/8/9 are hardware switch (ether6 master, 7/8/9 slave).
>>>> *From the rb2011 it goes to the Ethernet half of the SyncInjector.
>>>> *From the POE half of the SyncInjector it goes to WB gigeapc HV surge 
>>>> suppressors and then to the ePMP radios.
>>>> 
>>>> Two of the ePMP radios are powered up and running gige.  Neither are 
>>>> receiving CMM sync (top of the ePMP says "Not receiving GPS sync").  The 
>>>> remaining 6 APs aren't even powering up/linking up.  Any ideas before I 
>>>> start swapping parts?  Is it OK to have the surge between SyncInjectors 
>>>> and ePMP?
>>>> 
>>>> On top of all of this the SiteMonitor isn't talking to the POE injector or 
>>>> the two Gig SyncInjectors.  I have them all daisy chained and verified 
>>>> they're snapped in place.  The POE injector is powering Ubnt radios just 
>>>> fine.
>>>> 
>>>> Josh Luthman
>>>> Office: 937-552-2340 <tel:937-552-2340>
>>>> Direct: 937-552-2343 <tel:937-552-2343>
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>> 
>>>> 
>>>> 
>>> 
>> 
> 

Reply via email to