They are all told to run it simultaneously and while the SMs are doing it, the AP shuts itself up and runs a scan during that time.
From: Af [mailto:[email protected]] On Behalf Of Gino Villarini via Af Sent: Wednesday, December 03, 2014 11:37 AM To: [email protected] Subject: Re: [AFMUG] 13.3 Open Beta Woaw! Nice.... Is the Sector SA runs on the SMS at the same time or 1 by 1? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com<http://www.aeronetpr.com> @aeronetpr From: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, December 3, 2014 at 1:24 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] 13.3 Open Beta Gino, Great questions! Sector SA is a feature that runs a SA on the AP and all the SMs registered to it at the same time to get a true picture of the RF environment the AP and the SMs are seeing without the influence of the APs energy. The removal of the MAP in the PTP450 will give around an increase of 3.2 Mbps on each Channel Bandwidth. Best, Cambium Jonathan From: Af [mailto:[email protected]] On Behalf Of Gino Villarini via Af Sent: Wednesday, December 03, 2014 11:20 AM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] 13.3 Open Beta What is Sector SA? And removal of PT450 MAP? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com<http://www.aeronetpr.com> @aeronetpr From: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, December 3, 2014 at 12:44 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: [AFMUG] 13.3 Open Beta AF Community, Please visit the Cambium Networks webpage to down load the Open Beta version of 13.3 for PMP450 and PTP450 radios. https://support.cambiumnetworks.com/files/pmp450/beta https://support.cambiumnetworks.com/files/ptp450/beta ? PMP320 Co-location (5ms Frame support) (This will work on all bands, but intended for 3.5 and 3.65 at this time.) ? 7MHz Channel Bandwidth for 3.5 and 3.65 radios ? Removal of the PTP450 Map for faster link speeds ? SNMPv3 ? HTTPS ? Ability to turn off Telnet, FTP and TFTP ? Read-Only Accounts for Admin, Install, and Tech ? Sector SA ? Export of Sessions Status Page ? Config File export/Import for AP/BHM and SM/BHS NOTE: PMP320 co-location works best when both the PMP450 and PMP320 are on CMM synch sources. Cambium is writing a paper on how to adjust the radios to best deal with other synch sources, although the radios will still work together without adjustment with some impact to throughput. We look forward to you feedback on this release either in this forum or at: http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta Best, Cambium Jonathan
