+1 with major enthusiasm!
I can't even remember when we first asked for the config file
import/export. It's got to be close to 6 years now. Man oh man. We're
finally almost there!
and SNMPv3 too. Wowser.
--
bp
<part {dash} 15 {at} SkylineBroadbandService {dot} com>
On 12/3/2014 9:38 AM, George Skorup (Cyber Broadcasting) via Af wrote:
I really hope you guys will consider testing and releasing this for
FSK. We still use a lot of it. The config file will definitely be
helpful. And there's still no resolution for 2.4 FSK None frequency issue.
On 12/3/2014 10:44 AM, Jonathan Mandziara via Af wrote:
AF Community,
Please visit the Cambium Networks webpage to down load the Open Beta
version of 13.3 for PMP450 and PTP450 radios.
https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta
* PMP320 Co-location (5ms Frame support) (This will work on all
bands, but intended for 3.5 and 3.65 at this time.)
* 7MHz Channel Bandwidth for 3.5 and 3.65 radios
* Removal of the PTP450 Map for faster link speeds
* SNMPv3
* HTTPS
* Ability to turn off Telnet, FTP and TFTP
* Read-Only Accounts for Admin, Install, and Tech
* Sector SA
* Export of Sessions Status Page
* Config File export/Import for AP/BHM and SM/BHS
*NOTE:* PMP320 co-location works best when both the PMP450 and PMP320
are on CMM synch sources. Cambium is writing a paper on how to
adjust the radios to best deal with other synch sources, although the
radios will still work together without adjustment with some impact
to throughput.
We look forward to you feedback on this release either in this forum
or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
Best,
C*a*mbium Jonathan
