That is freakin awesome! Now where's my AP background spectrum analyzer? :)
On 12/3/2014 11:40 AM, Aaron Schneider via Af wrote:
They are all told to run it simultaneously and while the SMs are doing
it, the AP shuts itself up and runs a scan during that time.
*From:*Af [mailto:[email protected]] *On Behalf Of *Gino Villarini
via Af
*Sent:* Wednesday, December 03, 2014 11:37 AM
*To:* [email protected]
*Subject:* Re: [AFMUG] 13.3 Open Beta
Woaw! Nice�. Is the Sector SA runs on the SMS at the same time or 1 by 1?
Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com <http://www.aeronetpr.com>
@aeronetpr
*From: *"[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
*Reply-To: *"[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
*Date: *Wednesday, December 3, 2014 at 1:24 PM
*To: *"[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
*Subject: *Re: [AFMUG] 13.3 Open Beta
Gino,
Great questions!
Sector SA is a feature that runs a SA on the AP and all the SMs
registered to it at the same time to get a true picture of the RF
environment the AP and the SMs are seeing without the influence of the
APs energy.
The removal of the MAP in the PTP450 will give around an increase of
3.2 Mbps on each Channel Bandwidth.
Best,
Cambium Jonathan
*From:*Af [mailto:[email protected]] *On Behalf Of *Gino Villarini
via Af
*Sent:* Wednesday, December 03, 2014 11:20 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 13.3 Open Beta
What is Sector SA? And removal of PT450 MAP?
Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
www.aeronetpr.com <http://www.aeronetpr.com>
@aeronetpr
*From: *"[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
*Reply-To: *"[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
*Date: *Wednesday, December 3, 2014 at 12:44 PM
*To: *"[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
*Subject: *[AFMUG] 13.3 Open Beta
AF Community,
Please visit the Cambium Networks webpage to down load the Open Beta
version of 13.3 for PMP450 and PTP450 radios.
https://support.cambiumnetworks.com/files/pmp450/beta
https://support.cambiumnetworks.com/files/ptp450/beta
?PMP320 Co-location (5ms Frame support) (This will work on all bands,
but intended for 3.5 and 3.65 at this time.)
?7MHz Channel Bandwidth for 3.5 and 3.65 radios
?Removal of the PTP450 Map for faster link speeds
?SNMPv3
?HTTPS
?Ability to turn off Telnet, FTP and TFTP
?Read-Only Accounts for Admin, Install, and Tech
?Sector SA
?Export of Sessions Status Page
?Config File export/Import for AP/BHM and SM/BHS
*NOTE:* PMP320 co-location works best when both the PMP450 and PMP320
are on CMM synch sources. Cambium is writing a paper on how to adjust
the radios to best deal with other synch sources, although the radios
will still work together without adjustment with some impact to
throughput.
We look forward to you feedback on this release either in this forum
or at:
http://community.cambiumnetworks.com/t5/PMP-Beta/bd-p/forums_pmp_beta
Best,
C*a*mbium Jonathan
