Do you need something longer than you can get from a 900Mhz SM? We just take them out of dead radios.
Mark > On Dec 3, 2014, at 7:35 PM, Timothy D. McNabb via Af <[email protected]> wrote: > > So now that I know the cable, any recommendations for good cable builders for > custom lengths? Needs to be UV rated, able to withstand the elements and low > impedance (50ohm). > > -Tim > > From: Af [mailto:[email protected] <mailto:[email protected]>] On > Behalf Of Timothy D. McNabb via Af > Sent: Wednesday, December 03, 2014 4:14 PM > To: [email protected] <mailto:[email protected]> > Subject: Re: [AFMUG] N00b question > > Thanks George! > > -Tim > > From: Af [mailto:[email protected] <mailto:[email protected]>] On > Behalf Of George Skorup (Cyber Broadcasting) via Af > Sent: Wednesday, December 03, 2014 4:12 PM > To: [email protected] <mailto:[email protected]> > Subject: Re: [AFMUG] N00b question > > MCX > > On 12/3/2014 6:03 PM, Timothy D. McNabb via Af wrote: > For the connectorized FSK AP�s, what is the bulkhead connection type > mounted on the AP? The opposite end is an N connector (that connects to the > antenna) but I don�t what the connector type is used for the board -> > pigtail? I think it is an SMP connector but wanted to ask to be sure. > � > For reference it is the same connector that attaches to the GPS module of a > CMM4 to the N-connector passthrough box or whatever that silver block is. > � > Timothy McNabb > Network Administrator > Velociter Wireless, Inc > (209)838-1221 x107 > � >
