I would use an SM pigtail and a N female to N female "bulkhead" adapter out of your enclosure or something similar for whatever you're trying to do, then some LMR-200 or 400 up to the GPS antenna. Alternatively, bring the antenna cable in through a "feed-thru" gland and put a connector on it inside of the enclosure, so you have no weather-seal to worry about on the outside of the enclosure. You still have the antenna side weather-seal to worry about, but that's a given for any scenario.

On 12/3/2014 6:47 PM, Timothy D. McNabb via Af wrote:

8ft actually J

-Tim

*From:*Af [mailto:[email protected]] *On Behalf Of *Mark Radabaugh via Af
*Sent:* Wednesday, December 03, 2014 4:42 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] N00b question

Do you need something longer than you can get from a 900Mhz SM? We just take them out of dead radios.

Mark

    On Dec 3, 2014, at 7:35 PM, Timothy D. McNabb via Af <[email protected]
    <mailto:[email protected]>> wrote:

    So now that I know the cable, any recommendations for good cable
    builders for custom lengths? Needs to be UV rated, able to
    withstand the elements and low impedance (50ohm).

    -Tim

    *From:*Af [mailto:[email protected]]*On Behalf Of*Timothy D.
    McNabb via Af
    *Sent:*Wednesday, December 03, 2014 4:14 PM
    *To:*[email protected] <mailto:[email protected]>
    *Subject:*Re: [AFMUG] N00b question

    Thanks George!

    -Tim

    *From:*Af [mailto:[email protected]]*On Behalf Of*George Skorup
    (Cyber Broadcasting) via Af
    *Sent:*Wednesday, December 03, 2014 4:12 PM
    *To:*[email protected] <mailto:[email protected]>
    *Subject:*Re: [AFMUG] N00b question

    MCX

    On 12/3/2014 6:03 PM, Timothy D. McNabb via Af wrote:

        For the connectorized FSK AP�s, what is the bulkhead
        connection type mounted on the AP? The opposite end is an N
        connector (that connects to the antenna) but I don�t what
        the connector type is used for the board -> pigtail? I think
        it is an SMP connector but wanted to ask to be sure.

        �

        For reference it is the same connector that attaches to the
        GPS module of a CMM4 to the N-connector passthrough box or
        whatever that silver block is.

        �

        Timothy McNabb

        Network Administrator

        Velociter Wireless, Inc

        (209)838-1221 x107

        �


Reply via email to