8ft actually :) -Tim
From: Af [mailto:[email protected]] On Behalf Of Mark Radabaugh via Af Sent: Wednesday, December 03, 2014 4:42 PM To: [email protected] Subject: Re: [AFMUG] N00b question Do you need something longer than you can get from a 900Mhz SM? We just take them out of dead radios. Mark On Dec 3, 2014, at 7:35 PM, Timothy D. McNabb via Af <[email protected]<mailto:[email protected]>> wrote: So now that I know the cable, any recommendations for good cable builders for custom lengths? Needs to be UV rated, able to withstand the elements and low impedance (50ohm). -Tim From: Af [mailto:[email protected]] On Behalf Of Timothy D. McNabb via Af Sent: Wednesday, December 03, 2014 4:14 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] N00b question Thanks George! -Tim From: Af [mailto:[email protected]] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Wednesday, December 03, 2014 4:12 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] N00b question MCX On 12/3/2014 6:03 PM, Timothy D. McNabb via Af wrote: For the connectorized FSK AP�s, what is the bulkhead connection type mounted on the AP? The opposite end is an N connector (that connects to the antenna) but I don�t what the connector type is used for the board -> pigtail? I think it is an SMP connector but wanted to ask to be sure. � For reference it is the same connector that attaches to the GPS module of a CMM4 to the N-connector passthrough box or whatever that silver block is. � Timothy McNabb Network Administrator Velociter Wireless, Inc (209)838-1221 x107 �
