rfOutDiscardRate
Object ID: 1.3.6.1.4.1.161.19.3.1.7.35
Syntax: INTEGER
Constraints: 0..100
Access: read-only
Status: current
Percentage of OutDiscards on the RF link (RF Overload %) in the last minute.
On 1/26/2015 12:07 PM, Adam Moffett wrote:
I have often thought they needed something like "slots" utilized or
airtime utilized.
What I used to was track the utilization and modulation of each
session. Then it's possible to calculate how close to total usage you
are by doubling the numbers for the 1x subscribers. I had the raw
data in MySQL and a set of queries that would produce the numbers.
We graph all the ethernet Interfaces on our FSK Canopy AP's etc with
MRTG. Is there a way to graph the actual utilization to see when an
AP is maxed? I know an AP with all 2X clients should have 10mbps
downstream which most ours do. What I cant tell is when an AP has a
mix of 1X and 2X if the AP is maxed out or not by the graph. Same
principle for 450 AP's.
Perhaps there is a packet queue on the AP that gets congested at times
like this I can graph on five minute intervals? Something like that?
