I got frustrated and gave up. I worked on them for five days and even put them on publics and let Jose get into them. Apparently he got them to pass traffic on the bench after they got them back, so I have no idea what went wrong. It's not like this is my first rodeo. I was bummed....I was extremely hopeful that these would work for this particular link, but ended up going with an AF24. I will probably give them another shot when I'm not on a tight time schedule, and after some firmware revisions.
On Fri, Feb 13, 2015 at 7:50 PM, Kurt Fankhauser <[email protected]> wrote: > Jeremy, > > Yes I had issues but I didn't call support. It took me almost 2 hours to > get the two radios to see each other but I finally got them too. I wasn't > following the PTP quick start guide like I was told to. When I initially > configured the radios I disabled the 2nd port (called WAN) in the manual. > For some reason they would not link until I turned it back on. Even though > I wasn't using the WAN port. > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Fri, Feb 13, 2015 at 9:45 PM, Jeremy <[email protected]> wrote: > >> I had some issues with the configuration and couldn't ever get them to >> pass traffic. Did you run into any issues that required support? >> >> On Fri, Feb 13, 2015 at 7:38 PM, Rory Conaway <[email protected]> >> wrote: >> >>> I saw that too when I was reviewing the brochure this morning. I was >>> just assuming they were considering this a long range product. Kurt, do >>> you mind telling me what those radios cost? >>> >>> >>> >>> Rory >>> >>> >>> >>> *From:* Af [mailto:[email protected]] *On Behalf Of *Kurt Fankhauser >>> *Sent:* Friday, February 13, 2015 7:36 PM >>> *To:* [email protected] >>> *Subject:* [AFMUG] Trango Altum AC PTP test results >>> >>> >>> >>> Just got done testing a Trango Altum AC PTP link on the bench. Units >>> are 25db integrated panels. Did a 40mhz channel test and 80mhz via UDP. I >>> tried a TCP test between two RB2011's and best I seen was 175-180'ish >>> and that was with both 40 and 80mhz channels. CPU seemed to be maxing out >>> on the 2011's. >>> >>> >>> >>> Has UNI-1 bands and ISM bands. I was hoping it had the middle DFS bands >>> but it doesn't :( >>> >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >> >> >
