Jeremy, I ended up having to default the units and then follow the quick start guide to the T. There must be some bugs to work out in the firmware cause when I ordered them the guy told me to follow the quick start to the T.
Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Fri, Feb 13, 2015 at 9:59 PM, Jeremy <[email protected]> wrote: > I also didn't follow the guide the first time. On subsequent attempts I > did, but it seemed like something was wrong with them at that point. > Anyway, it's nice to see someone having some success. The platform looks > like it has a lot of potential. > > On Fri, Feb 13, 2015 at 7:50 PM, Kurt Fankhauser <[email protected]> > wrote: > >> Jeremy, >> >> Yes I had issues but I didn't call support. It took me almost 2 hours to >> get the two radios to see each other but I finally got them too. I wasn't >> following the PTP quick start guide like I was told to. When I initially >> configured the radios I disabled the 2nd port (called WAN) in the manual. >> For some reason they would not link until I turned it back on. Even though >> I wasn't using the WAN port. >> >> >> Kurt Fankhauser >> >> Wavelinc Communications >> >> P.O. Box 126 >> >> Bucyrus, OH 44820 >> >> http://www.wavelinc.com >> >> tel. 419-562-6405 >> >> fax. 419-617-0110 >> >> On Fri, Feb 13, 2015 at 9:45 PM, Jeremy <[email protected]> wrote: >> >>> I had some issues with the configuration and couldn't ever get them to >>> pass traffic. Did you run into any issues that required support? >>> >>> On Fri, Feb 13, 2015 at 7:38 PM, Rory Conaway <[email protected]> >>> wrote: >>> >>>> I saw that too when I was reviewing the brochure this morning. I was >>>> just assuming they were considering this a long range product. Kurt, do >>>> you mind telling me what those radios cost? >>>> >>>> >>>> >>>> Rory >>>> >>>> >>>> >>>> *From:* Af [mailto:[email protected]] *On Behalf Of *Kurt Fankhauser >>>> *Sent:* Friday, February 13, 2015 7:36 PM >>>> *To:* [email protected] >>>> *Subject:* [AFMUG] Trango Altum AC PTP test results >>>> >>>> >>>> >>>> Just got done testing a Trango Altum AC PTP link on the bench. Units >>>> are 25db integrated panels. Did a 40mhz channel test and 80mhz via UDP. I >>>> tried a TCP test between two RB2011's and best I seen was 175-180'ish >>>> and that was with both 40 and 80mhz channels. CPU seemed to be maxing out >>>> on the 2011's. >>>> >>>> >>>> >>>> Has UNI-1 bands and ISM bands. I was hoping it had the middle DFS bands >>>> but it doesn't :( >>>> >>>> >>>> >>>> Kurt Fankhauser >>>> >>>> Wavelinc Communications >>>> >>>> P.O. Box 126 >>>> >>>> Bucyrus, OH 44820 >>>> >>>> http://www.wavelinc.com >>>> >>>> tel. 419-562-6405 >>>> >>>> fax. 419-617-0110 >>>> >>> >>> >> >
