I would assume AF5x is going to be the same issue if you are using GPS? Erich Kaiser North Central Tower Consulting [email protected] Office: 630-621-4804 Cell: 630-777-9291
On Fri, Feb 13, 2015 at 10:23 PM, Kurt Fankhauser <[email protected]> wrote: > I can't afford 8-12ms of latency 7 hops out... Time for some Full Duplex > links I suppose.... > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Fri, Feb 13, 2015 at 10:43 PM, Erich Kaiser < > [email protected]> wrote: > >> The Mimosa seems awesome so far (Except for lack of SNMP support, which >> is coming in April). If you have GPS sync it seems to run between 8ms-12ms. >> >> Erich Kaiser >> North Central Tower Consulting >> [email protected] >> Office: 630-621-4804 >> Cell: 630-777-9291 >> >> On Fri, Feb 13, 2015 at 9:29 PM, Kurt Fankhauser <[email protected]> >> wrote: >> >>> I was hoping to replace a Ligowave link I have that's running on 40mhz. >>> I don't feel like burning up a whole 80mhz of spectrum through, so I think >>> I'll be buying a PTP-650 especially since I need DFS freq's. >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> On Fri, Feb 13, 2015 at 10:19 PM, Jeremy <[email protected]> wrote: >>> >>>> I see that they sell them on the 'Trango store' now too. Pretty sweet. >>>> >>>> >>>> On Fri, Feb 13, 2015 at 8:17 PM, Jeremy <[email protected]> wrote: >>>> >>>>> Yeah, that is what I was told at Animal Farm also. It seems like >>>>> doing something specific or something in the wrong order makes them not >>>>> work. Next time I guess I'll have to follow directions, LOL. >>>>> >>>>> On Fri, Feb 13, 2015 at 8:11 PM, Kurt Fankhauser <[email protected]> >>>>> wrote: >>>>> >>>>>> Jeremy, >>>>>> >>>>>> I ended up having to default the units and then follow the quick >>>>>> start guide to the T. There must be some bugs to work out in the firmware >>>>>> cause when I ordered them the guy told me to follow the quick start to >>>>>> the >>>>>> T. >>>>>> >>>>>> >>>>>> Kurt Fankhauser >>>>>> >>>>>> Wavelinc Communications >>>>>> >>>>>> P.O. Box 126 >>>>>> >>>>>> Bucyrus, OH 44820 >>>>>> >>>>>> http://www.wavelinc.com >>>>>> >>>>>> tel. 419-562-6405 >>>>>> >>>>>> fax. 419-617-0110 >>>>>> >>>>>> On Fri, Feb 13, 2015 at 9:59 PM, Jeremy <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> I also didn't follow the guide the first time. On subsequent >>>>>>> attempts I did, but it seemed like something was wrong with them at that >>>>>>> point. Anyway, it's nice to see someone having some success. The >>>>>>> platform >>>>>>> looks like it has a lot of potential. >>>>>>> >>>>>>> On Fri, Feb 13, 2015 at 7:50 PM, Kurt Fankhauser <[email protected] >>>>>>> > wrote: >>>>>>> >>>>>>>> Jeremy, >>>>>>>> >>>>>>>> Yes I had issues but I didn't call support. It took me almost 2 >>>>>>>> hours to get the two radios to see each other but I finally got them >>>>>>>> too. I >>>>>>>> wasn't following the PTP quick start guide like I was told to. When I >>>>>>>> initially configured the radios I disabled the 2nd port (called WAN) >>>>>>>> in the >>>>>>>> manual. For some reason they would not link until I turned it back on. >>>>>>>> Even >>>>>>>> though I wasn't using the WAN port. >>>>>>>> >>>>>>>> >>>>>>>> Kurt Fankhauser >>>>>>>> >>>>>>>> Wavelinc Communications >>>>>>>> >>>>>>>> P.O. Box 126 >>>>>>>> >>>>>>>> Bucyrus, OH 44820 >>>>>>>> >>>>>>>> http://www.wavelinc.com >>>>>>>> >>>>>>>> tel. 419-562-6405 >>>>>>>> >>>>>>>> fax. 419-617-0110 >>>>>>>> >>>>>>>> On Fri, Feb 13, 2015 at 9:45 PM, Jeremy <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> I had some issues with the configuration and couldn't ever get >>>>>>>>> them to pass traffic. Did you run into any issues that required >>>>>>>>> support? >>>>>>>>> >>>>>>>>> On Fri, Feb 13, 2015 at 7:38 PM, Rory Conaway < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> I saw that too when I was reviewing the brochure this morning. >>>>>>>>>> I was just assuming they were considering this a long range product. >>>>>>>>>> Kurt, >>>>>>>>>> do you mind telling me what those radios cost? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Rory >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *From:* Af [mailto:[email protected]] *On Behalf Of *Kurt >>>>>>>>>> Fankhauser >>>>>>>>>> *Sent:* Friday, February 13, 2015 7:36 PM >>>>>>>>>> *To:* [email protected] >>>>>>>>>> *Subject:* [AFMUG] Trango Altum AC PTP test results >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Just got done testing a Trango Altum AC PTP link on the bench. >>>>>>>>>> Units are 25db integrated panels. Did a 40mhz channel test and 80mhz >>>>>>>>>> via >>>>>>>>>> UDP. I tried a TCP test between two RB2011's and best I seen was >>>>>>>>>> 175-180'ish and that was with both 40 and 80mhz channels. CPU seemed >>>>>>>>>> to be >>>>>>>>>> maxing out on the 2011's. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Has UNI-1 bands and ISM bands. I was hoping it had the middle DFS >>>>>>>>>> bands but it doesn't :( >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Kurt Fankhauser >>>>>>>>>> >>>>>>>>>> Wavelinc Communications >>>>>>>>>> >>>>>>>>>> P.O. Box 126 >>>>>>>>>> >>>>>>>>>> Bucyrus, OH 44820 >>>>>>>>>> >>>>>>>>>> http://www.wavelinc.com >>>>>>>>>> >>>>>>>>>> tel. 419-562-6405 >>>>>>>>>> >>>>>>>>>> fax. 419-617-0110 >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
