I agree. I also find that when mounting to a tower sometimes you can't put the M-TOW exactly where you want it because it will hit something like a cross-member. With the 10" models you have more freedom to move mounts up and down accordingly and still meet up with the brackets on the antenna. It also helps that for quite some time due to an error I was getting the 10s cheaper than the regular M-TOWs with my distributor!!
-Ty On Thu, Feb 19, 2015 at 9:31 AM, Josh Luthman <[email protected]> wrote: > I find a lot of products work with the 10" versus the standard 6". Not by > more than an inch or two, though :/ > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Feb 19, 2015 10:22 AM, "Vince West" <[email protected]> wrote: > >> I would use an M-TOW >> <http://www.wbmfg.com/pdf.cfm/WBMfg-Tower%20Mount.pdf?pid=27> or M-TOW-10 >> <http://www.wbmfg.com/pdf.cfm/WBMfg-Tower%20Mount.pdf?pid=27> (not sure >> what the spacing is on the bracket for the Cyclone AP). I use a lot of the >> M-TOW-10 just because I like having the extra space on the mount. >> >> Vince West >> Tower Hand >> Technical Support >> Shelby Broadband >> 148 Citizens Blvd >> Simpsonville, KY 40067 >> Phone: 1-888-364-4232 >> >> On Thu, Feb 19, 2015 at 9:07 AM, Ryan Mano <[email protected]> >> wrote: >> >>> I need to mount an omni cyclone on the side of the dmx tower…what >>> tower mount should I get from wb manufacturing? >>> >>> >>> >>> thanks >>> >> >>
