I’m just thinking you might want two points of attachment to the tower and a longer pipe for mounting a Cyclone. Another question is, since it’s an omni, how much standoff does he want from the tower to avoid the tower affecting the antenna pattern. The lower the frequency, the farther you probably need to be away from the tower.
From: David Sent: Thursday, February 19, 2015 10:14 AM To: af@afmug.com Subject: Re: [AFMUG] mount for tower We use those for our ptp800 dishes and for the 450 panels Mainly use the MTOW-3P-36 for Sector mounting using the 450 gear On 02/19/2015 09:37 AM, Ken Hohhof wrote: MTOW-P http://www.wbmfg.com/products.cfm?PID=34 From: Vince West Sent: Thursday, February 19, 2015 9:22 AM To: af@afmug.com Subject: Re: [AFMUG] mount for tower I would use an M-TOW or M-TOW-10 (not sure what the spacing is on the bracket for the Cyclone AP). I use a lot of the M-TOW-10 just because I like having the extra space on the mount. Vince West Tower Hand Technical Support Shelby Broadband 148 Citizens Blvd Simpsonville, KY 40067 Phone: 1-888-364-4232 On Thu, Feb 19, 2015 at 9:07 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: I need to mount an omni cyclone on the side of the dmx tower…what tower mount should I get from wb manufacturing? thanks
