Do you have a source you would recommend for the 7301? Ebay or otherwise? On Fri, Feb 20, 2015 at 1:26 PM, Eric Kuhnke <[email protected]> wrote:
> Sure, depends on your climate and install location. If you want > something smaller and not too expensive that will handle up to gigE buy a > 7301, it's the same routing engine as either a NPE-G100 (in a 7304) or a > NPE-G1 in a 7206VXR. > > 1U rackmount, three gigE, you can add a single PA for an additional two > 100BaseTX or a single PA-GE for a 4th gigE. > > I've been buying 7301 for right around $250 a piece for edge stuff. > > The 7201 is the same thing as an NPE-G2 and still too much $$$$. > > > > On 2/20/15 7:19 PM, Mike Hammett wrote: > > and have a space heater too. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > > ------------------------------ > *From: *"Eric Kuhnke" <[email protected]> > <[email protected]> > *To: *[email protected] > *Sent: *Friday, February 20, 2015 1:17:04 PM > *Subject: *Re: [AFMUG] Juniper / Cisco GE Recommendations > > a 3560X or a 3750 is not really a router. it's a switch that wishes it > were a router. for under $500 you can build a 6506E with dual sup32 that > will run circles around it in real world routing performance and can do > things like MPLS... > > or buy a 7606 or 7609 and equip similarly for under $800. > > > On 2/20/15 6:58 PM, Jeremy wrote: > > 3560X? With the four-SFP module. > > On Fri, Feb 20, 2015 at 11:35 AM, Jason McKemie < > [email protected]> wrote: > >> This will be an edge router, I'm not looking to do any BGP at the moment, >> but it wouldn't be a bad thing to have that option for the future. >> Ultimately, I'd like for it to be able to move around a gigabit, but a few >> hundred megabit would probably suffice for now if the price was right. >> Features needed are basic routing / simple firewall with possibly the >> ability of terminating VPN connections. >> >> On Fri, Feb 20, 2015 at 12:29 PM, Josh Baird <[email protected]> wrote: >> >>> What kind of feature set are you looking for? Are you using this for >>> edge routing (eg eBGP) or just switching? What other features do you >>> need? How much traffic are you looking to push? >>> >>> On Fri, Feb 20, 2015 at 1:25 PM, Jason McKemie < >>> [email protected]> wrote: >>> >>>> L3. >>>> >>>> On Fri, Feb 20, 2015 at 12:10 PM, Josh Baird <[email protected]> >>>> wrote: >>>> >>>>> Do you need L3 or just L2? >>>>> >>>>> On Fri, Feb 20, 2015 at 12:09 PM, Jason McKemie < >>>>> [email protected]> wrote: >>>>> >>>>>> I started a thread to this effect a long time ago, but wanted to see >>>>>> if there are any new thoughts. I'm having some difficulty getting a >>>>>> Mikrotik CCR to link up correctly to a Cisco Nexus switch via SFP. >>>>>> Therefore, I'm looking to go with Cisco or Juniper on my end, but would >>>>>> probably be looking at something besides the brand new models. It does >>>>>> need to be able to handle GigE, however. Any recommendations? Thanks. >>>>>> >>>>>> -Jason >>>>>> >>>>> >>>>> >>>> >>> >> > > > >
