|
Those guys will combine shipping, if
you buy 2, 3 or 4 units it costs a lot less than $80 per unit.
On 2/20/15 8:21 PM, Josh Reynolds wrote:
http://m.ebay.com/itm/like/191300871212?lpid=82&chn=ps
:: Josh Reynolds, CIO, SPITwSPOTS - Pardon any
brevity, this message was sent via mobile device
On Feb 20, 2015 10:57 AM, Eric Kuhnke
<[email protected]> wrote:
ebay, yeah.
It can't hurt to google "used cisco routers" and send an
email RFQ to a bunch of random dealers, only takes a few
minutes. Whatever you do don't give them your phone
number!
On 2/20/15 7:44 PM, Jason McKemie wrote:
Do you have a source you would recommend
for the 7301? Ebay or otherwise?
On Fri, Feb 20, 2015 at 1:26
PM, Eric Kuhnke <[email protected]>
wrote:
Sure, depends on your climate and install
location. If you want something smaller and not
too expensive that will handle up to gigE buy a
7301, it's the same routing engine as either a
NPE-G100 (in a 7304) or a NPE-G1 in a 7206VXR.
1U rackmount, three gigE, you can add a single
PA for an additional two 100BaseTX or a single
PA-GE for a 4th gigE.
I've been buying 7301 for right around $250 a
piece for edge stuff.
The 7201 is the same thing as an NPE-G2 and
still too much $$$$.
On 2/20/15 7:19 PM, Mike Hammett wrote:
and
have a space heater too.
From:
"Eric Kuhnke" <[email protected]>
To: [email protected]
Sent: Friday, February 20, 2015
1:17:04 PM
Subject: Re: [AFMUG] Juniper /
Cisco GE Recommendations
a 3560X or a 3750 is not really a
router. it's a switch that wishes it
were a router. for under $500 you can
build a 6506E with dual sup32 that
will run circles around it in real
world routing performance and can do
things like MPLS...
or buy a 7606 or 7609 and equip
similarly for under $800.
On 2/20/15 6:58 PM, Jeremy wrote:
3560X? With the
four-SFP module.
On Fri, Feb
20, 2015 at 11:35 AM, Jason
McKemie <[email protected]>
wrote:
This will be an
edge router, I'm not looking
to do any BGP at the moment,
but it wouldn't be a bad thing
to have that option for the
future. Ultimately, I'd like
for it to be able to move
around a gigabit, but a few
hundred megabit would probably
suffice for now if the price
was right. Features needed
are basic routing / simple
firewall with possibly the
ability of terminating VPN
connections.
On
Fri, Feb 20, 2015 at 12:29
PM, Josh Baird <[email protected]>
wrote:
What kind
of feature set are you
looking for? Are you
using this for edge
routing (eg eBGP) or
just switching? What
other features do you
need? How much traffic
are you looking to push?
On
Fri, Feb 20, 2015
at 1:25 PM, Jason
McKemie <[email protected]>
wrote:
L3.
On
Fri, Feb 20,
2015 at 12:10
PM, Josh Baird
<[email protected]>
wrote:
Do
you need L3 or
just L2?
On
Fri, Feb 20,
2015 at 12:09
PM, Jason
McKemie <[email protected]>
wrote:
I
started a
thread to this
effect a long
time ago, but
wanted to see
if there are
any new
thoughts. I'm
having some
difficulty
getting a
Mikrotik CCR
to link up
correctly to a
Cisco Nexus
switch via
SFP.
Therefore, I'm
looking to go
with Cisco or
Juniper on my
end, but would
probably be
looking at
something
besides the
brand new
models. It
does need to
be able to
handle GigE,
however. Any
recommendations?
Thanks.
-Jason
|
