Could it be worse?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Mar 10, 2015 at 1:16 PM, That One Guy <[email protected]> wrote: > hopefully the POE passthrough is better than the UBNT passthrough > > On Tue, Mar 10, 2015 at 6:06 AM, John Woodfield <[email protected]> > wrote: > >> The PTP mode has been there. It allows to turn about the power to 30dbm >> in 5.8. I had a radio running at 30dbm and it would crap out within 12 >> hours - ethernet port would quit working. I dropped it to 28dbm and it >> works fine YMMV. >> >> >> >> >> >> The new PTP master/slave mode was supposed to cut latency - from what I >> saw it only cut it by about 5ms and the performance cut was dramatic. >> >> >> >> >> >> >> >> John Woodfield, President >> >> Delmarva WiFi Inc. >> >> 410-870-WiFi >> >> >> >> -----Original Message----- >> From: "George Skorup (Cyber Broadcasting)" <[email protected]> >> Sent: Tuesday, March 10, 2015 2:57am >> To: [email protected] >> Subject: Re: [AFMUG] ePMP Release 2.4 is Now Available >> >> If that's the case, then that's not cool. I see there's two PTP modes >> though. One is ePTP Master and Slave. The other is just PTP. Look like the >> PTP mode requires fixed distance settings at both ends? And ePTP mode does >> auto-ranging like Canopy BHM/BHSs perhaps? >> >> When are we going to get 2.5ms framing to sync with Canopy? >> >> I see we can now turn on the aux port PoE output and it'll power another >> ePMP or Canopy SM. PTP from a customer's barn to their house got easier. >> But that additional 20ms of latency is not so good, so hopefully PTP mode >> for a 1000' link works. >> >> On 3/9/2015 8:36 PM, John Woodfield wrote: >> >> This new mode of operation increases retransmits and cuts throughput in >> half in environments with any noise from what I've seen so far. >> >> >> >> >> >> >> >> >> >> John Woodfield, President >> >> Delmarva WiFi Inc. >> >> 410-870-WiFi >> >> >> >> -----Original Message----- >> From: "Mike Hammett" <[email protected]> <[email protected]> >> Sent: Monday, March 9, 2015 3:38pm >> To: [email protected] >> Subject: Re: [AFMUG] ePMP Release 2.4 is Now Available >> >> >> - New ePTP mode of operation: The release introduces a new mode of >> operation for point-to-point configuration providing significantly lower >> latency than other modes. *Not available for DFS bands.* >> >> >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> >> ------------------------------ >> *From: *"Ray Savich" <[email protected]> >> <[email protected]> >> *To: *"[email protected]" <[email protected]> <[email protected]> <[email protected]> >> *Sent: *Monday, March 9, 2015 1:33:08 PM >> *Subject: *[AFMUG] ePMP Release 2.4 is Now Available >> >> ePMP Release 2.4 includes new enhancements to eFortify™ and >> eCommand™. Check out the details at http://bit.ly/1BYo2ja >> >> >> >> Ray >> >> >> >> Join the Conversation >> >> Cambium Networks Community Forum <http://community.cambiumnetworks.com/> >> >> >> >> > > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. >
