Well, it could not work at all... no, wait... that would probably actually be better. I guess it would be worse if it burnt whatever you plugged into it to a crisp.
On Tue, Mar 10, 2015 at 12:19 PM, Josh Luthman <[email protected]> wrote: > Could it be worse? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Mar 10, 2015 at 1:16 PM, That One Guy <[email protected]> > wrote: > >> hopefully the POE passthrough is better than the UBNT passthrough >> >> On Tue, Mar 10, 2015 at 6:06 AM, John Woodfield <[email protected]> >> wrote: >> >>> The PTP mode has been there. It allows to turn about the power to 30dbm >>> in 5.8. I had a radio running at 30dbm and it would crap out within 12 >>> hours - ethernet port would quit working. I dropped it to 28dbm and it >>> works fine YMMV. >>> >>> >>> >>> >>> >>> The new PTP master/slave mode was supposed to cut latency - from what I >>> saw it only cut it by about 5ms and the performance cut was dramatic. >>> >>> >>> >>> >>> >>> >>> >>> John Woodfield, President >>> >>> Delmarva WiFi Inc. >>> >>> 410-870-WiFi >>> >>> >>> >>> -----Original Message----- >>> From: "George Skorup (Cyber Broadcasting)" <[email protected]> >>> Sent: Tuesday, March 10, 2015 2:57am >>> To: [email protected] >>> Subject: Re: [AFMUG] ePMP Release 2.4 is Now Available >>> >>> If that's the case, then that's not cool. I see there's two PTP modes >>> though. One is ePTP Master and Slave. The other is just PTP. Look like the >>> PTP mode requires fixed distance settings at both ends? And ePTP mode does >>> auto-ranging like Canopy BHM/BHSs perhaps? >>> >>> When are we going to get 2.5ms framing to sync with Canopy? >>> >>> I see we can now turn on the aux port PoE output and it'll power another >>> ePMP or Canopy SM. PTP from a customer's barn to their house got easier. >>> But that additional 20ms of latency is not so good, so hopefully PTP mode >>> for a 1000' link works. >>> >>> On 3/9/2015 8:36 PM, John Woodfield wrote: >>> >>> This new mode of operation increases retransmits and cuts throughput in >>> half in environments with any noise from what I've seen so far. >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> John Woodfield, President >>> >>> Delmarva WiFi Inc. >>> >>> 410-870-WiFi >>> >>> >>> >>> -----Original Message----- >>> From: "Mike Hammett" <[email protected]> <[email protected]> >>> Sent: Monday, March 9, 2015 3:38pm >>> To: [email protected] >>> Subject: Re: [AFMUG] ePMP Release 2.4 is Now Available >>> >>> >>> - New ePTP mode of operation: The release introduces a new mode of >>> operation for point-to-point configuration providing significantly lower >>> latency than other modes. *Not available for DFS bands.* >>> >>> >>> >>> >>> >>> ----- >>> Mike Hammett >>> Intelligent Computing Solutions >>> http://www.ics-il.com >>> >>> <https://www.facebook.com/ICSIL> >>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>> <https://twitter.com/ICSIL> >>> >>> ------------------------------ >>> *From: *"Ray Savich" <[email protected]> >>> <[email protected]> >>> *To: *"[email protected]" <[email protected]> <[email protected]> <[email protected]> >>> *Sent: *Monday, March 9, 2015 1:33:08 PM >>> *Subject: *[AFMUG] ePMP Release 2.4 is Now Available >>> >>> ePMP Release 2.4 includes new enhancements to eFortify™ and >>> eCommand™. Check out the details at http://bit.ly/1BYo2ja >>> >>> >>> >>> Ray >>> >>> >>> >>> Join the Conversation >>> >>> Cambium Networks Community Forum <http://community.cambiumnetworks.com/> >>> >>> >>> >>> >> >> >> -- >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> > >
