So this could be an option to switch -48vdc on and off without a problem? Erich Kaiser North Central Tower [email protected] Office: 630-621-4804 Cell: 630-777-9291
On Tue, Mar 10, 2015 at 8:08 PM, Forrest Christian (List Account) < [email protected]> wrote: > For DC: > > From 0-30V: 2 Amps. > Above 30V: 60 Watts. > > (If you need amps above 30v, divide 60 by your voltage: For example, at > 60V, it's 1A). > > I'm not going to tell you how much the maximum relay voltage is at DC > since I don't want to encourage you putting that much voltage through this > device, and I'd have to check PCB and connector ratings to see what you > could actually put through. Let's just say it's a lot more than 60VDC. > > This applies to any sitemonitor device with a built-in relay: PoE4, PoE8, > 6 Relay, the mixed relay out/switch in modules, the temperature control > module, and the base unit. And possibly one I forgot. > > -forrest > > On Tue, Mar 10, 2015 at 6:36 PM, Erich Kaiser <[email protected] > > wrote: > >> Forrest can you verify actual allowed amperage and voltage range on the >> Site Monitor 4 Channel Relay? >> >> Thanks! >> >> >> Erich Kaiser >> North Central Tower >> [email protected] >> Office: 630-621-4804 >> Cell: 630-777-9291 >> > > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > >
