Depends on the load.

There is also a solid state relay module coming which will do several amps
@ +-48VDC.   It's very close.

-forrest

On Tue, Mar 10, 2015 at 7:15 PM, Erich Kaiser <[email protected]>
wrote:

> So this could be an option to switch -48vdc on and off without a problem?
>
> Erich Kaiser
> North Central Tower
> [email protected]
> Office: 630-621-4804
> Cell: 630-777-9291
>
> On Tue, Mar 10, 2015 at 8:08 PM, Forrest Christian (List Account) <
> [email protected]> wrote:
>
>> For DC:
>>
>> From 0-30V: 2 Amps.
>> Above 30V: 60 Watts.
>>
>> (If you need amps above 30v, divide 60 by your voltage:  For example, at
>> 60V, it's 1A).
>>
>> I'm not going to tell you how much the maximum relay voltage is at DC
>> since I don't want to encourage you putting that much voltage through this
>> device, and I'd have to check PCB and connector ratings to see what you
>> could actually put through.  Let's just say it's a lot more than 60VDC.
>>
>> This applies to any sitemonitor device with a built-in relay:  PoE4,
>> PoE8, 6 Relay, the mixed relay out/switch in modules, the temperature
>> control module, and the base unit.  And possibly one I forgot.
>>
>> -forrest
>>
>> On Tue, Mar 10, 2015 at 6:36 PM, Erich Kaiser <
>> [email protected]> wrote:
>>
>>> Forrest can you verify actual allowed amperage and voltage range on the
>>> Site Monitor 4 Channel Relay?
>>>
>>> Thanks!
>>>
>>>
>>> Erich Kaiser
>>> North Central Tower
>>> [email protected]
>>> Office: 630-621-4804
>>> Cell: 630-777-9291
>>>
>>
>>
>>
>> --
>> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.*
>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
>> [email protected] | http://www.packetflux.com
>> <http://www.linkedin.com/in/fwchristian>
>> <http://facebook.com/packetflux>  <http://twitter.com/@packetflux>
>>
>>
>


-- 
*Forrest Christian* *CEO**, PacketFlux Technologies, Inc.*
Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
[email protected] | http://www.packetflux.com
<http://www.linkedin.com/in/fwchristian>  <http://facebook.com/packetflux>
<http://twitter.com/@packetflux>

Reply via email to