Dish is about 33db..and Tx power was 4dBm... sensitivity is -97db... Jaime Solorza Wireless Systems Architect 915-861-1390
On Tue, Mar 24, 2015 at 1:56 PM, Chuck McCown <[email protected]> wrote: > I was thinking the same thing. 16 miles. Most radios want a 2 or 3 > foot dish on both ends minimum to do those lengths. But maybe it is a 1 > watt radio and a very quiet noise floor? One would hope UBNT could jump in > here and answer the question. > > *From:* Jerry Richardson <[email protected]> > *Sent:* Tuesday, March 24, 2015 1:31 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] 10 GHz Ubiquiti radios > > > My first though was “that’s a long shot” > > > > Second thought was “math is math…” so it would depend on the Tx power, > noise floor (probably non-existent), Rx sensitivity, and the antenna gain. > > > > Jerry R > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Jaime Solorza > *Sent:* Tuesday, March 24, 2015 9:45 AM > *To:* Animal Farm > *Subject:* Re: [AFMUG] 10 GHz Ubiquiti radios > > > > Thanks Mike for reading what I wrote....I know allot of folks think El > Paso is part of Mexico, even Texas treats us as a step child, but alas I am > in the US. This list is international and not US-only as far as I know. > The question was to those in other countries that might have used these > radios. As far as I know the 10GHz is allowed in Mexico under a licensing > process via CofeTel and SCT. I was hired to configure them and make sure > they "talked" to each other passed traffic before they go to customs and > get exported to Mexico. The integrator hired me due to recommendation from > the Syscom/Epcom distributors sales representative. > > I don't know about the conversion but case was huge! > > > > > Jaime Solorza > > Wireless Systems Architect > > 915-861-1390 > > > > On Tue, Mar 24, 2015 at 10:05 AM, Mike Hammett <[email protected]> wrote: > > He did say Maxico and Chihuahua... ;-) > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > > ------------------------------ > > *From: *"Kurt Fankhauser" <[email protected]> > *To: *[email protected] > *Sent: *Tuesday, March 24, 2015 11:03:03 AM > *Subject: *Re: [AFMUG] 10 GHz Ubiquiti radios > > What country are you in? Here in the US we can't use that band except > maybe under HAM radio operations so your not going to find very many people > that have used that radio... > > > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > > > On Tue, Mar 24, 2015 at 11:58 AM, Jaime Solorza <[email protected]> > wrote: > > I configured a pair of 10GHz PTP Ubiquiti radios and 3 2.4GHz M2 with > sectors for a cement company outfit out of Mexico that is going to install > them in a canyon. > > I had never played with the 10GHz product before and it was same interface > as M5 pretty much. The box with dishes was good size. I didn't take them > out as the radios connected to each other on bench. > > What kind of distance can these radios provide? The integrator installing > the radios, cameras, UniFi and phones says they are going to shoot from a > tower on mountain to quarry about 16 miles down the canyon. Can these > work that far? > > I asked why they didn't use 5GHz and told me someone at Syscom in > Chihuahua recommended these for long distance. > > Any one use these before? > > Jaime Solorza > > Wireless Systems Architect > > 915-861-1390 > > > > > > >
