At the lowest modulation rate, maybe. I'm also doubting such sensitivity on a Ubnt radio.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Mar 24, 2015 at 4:16 PM, Jaime Solorza <[email protected]> wrote: > Dish is about 33db..and Tx power was 4dBm... sensitivity is -97db... > > Jaime Solorza > Wireless Systems Architect > 915-861-1390 > > On Tue, Mar 24, 2015 at 1:56 PM, Chuck McCown <[email protected]> wrote: > >> I was thinking the same thing. 16 miles. Most radios want a 2 or 3 >> foot dish on both ends minimum to do those lengths. But maybe it is a 1 >> watt radio and a very quiet noise floor? One would hope UBNT could jump in >> here and answer the question. >> >> *From:* Jerry Richardson <[email protected]> >> *Sent:* Tuesday, March 24, 2015 1:31 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] 10 GHz Ubiquiti radios >> >> >> My first though was “that’s a long shot” >> >> >> >> Second thought was “math is math…” so it would depend on the Tx power, >> noise floor (probably non-existent), Rx sensitivity, and the antenna gain. >> >> >> >> Jerry R >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *Jaime Solorza >> *Sent:* Tuesday, March 24, 2015 9:45 AM >> *To:* Animal Farm >> *Subject:* Re: [AFMUG] 10 GHz Ubiquiti radios >> >> >> >> Thanks Mike for reading what I wrote....I know allot of folks think El >> Paso is part of Mexico, even Texas treats us as a step child, but alas I am >> in the US. This list is international and not US-only as far as I know. >> The question was to those in other countries that might have used these >> radios. As far as I know the 10GHz is allowed in Mexico under a licensing >> process via CofeTel and SCT. I was hired to configure them and make sure >> they "talked" to each other passed traffic before they go to customs and >> get exported to Mexico. The integrator hired me due to recommendation from >> the Syscom/Epcom distributors sales representative. >> >> I don't know about the conversion but case was huge! >> >> >> >> >> Jaime Solorza >> >> Wireless Systems Architect >> >> 915-861-1390 >> >> >> >> On Tue, Mar 24, 2015 at 10:05 AM, Mike Hammett <[email protected]> wrote: >> >> He did say Maxico and Chihuahua... ;-) >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> >> ------------------------------ >> >> *From: *"Kurt Fankhauser" <[email protected]> >> *To: *[email protected] >> *Sent: *Tuesday, March 24, 2015 11:03:03 AM >> *Subject: *Re: [AFMUG] 10 GHz Ubiquiti radios >> >> What country are you in? Here in the US we can't use that band except >> maybe under HAM radio operations so your not going to find very many people >> that have used that radio... >> >> >> >> >> Kurt Fankhauser >> >> Wavelinc Communications >> >> P.O. Box 126 >> >> Bucyrus, OH 44820 >> >> http://www.wavelinc.com >> >> tel. 419-562-6405 >> >> fax. 419-617-0110 >> >> >> >> On Tue, Mar 24, 2015 at 11:58 AM, Jaime Solorza < >> [email protected]> wrote: >> >> I configured a pair of 10GHz PTP Ubiquiti radios and 3 2.4GHz M2 with >> sectors for a cement company outfit out of Mexico that is going to install >> them in a canyon. >> >> I had never played with the 10GHz product before and it was same >> interface as M5 pretty much. The box with dishes was good size. I didn't >> take them out as the radios connected to each other on bench. >> >> What kind of distance can these radios provide? The integrator >> installing the radios, cameras, UniFi and phones says they are going to >> shoot from a tower on mountain to quarry about 16 miles down the canyon. >> Can these work that far? >> >> I asked why they didn't use 5GHz and told me someone at Syscom in >> Chihuahua recommended these for long distance. >> >> Any one use these before? >> >> Jaime Solorza >> >> Wireless Systems Architect >> >> 915-861-1390 >> >> >> >> >> >> >> > >
