And they couldn't do 5 GHz because some managers ignorance prevailed.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Mar 24, 2015 at 4:36 PM, Jaime Solorza <[email protected]> wrote: > Yep...I did ask him to take screen shots of link and performance. They > are hoping to get 5Mbps down and 1 up.... > > > Jaime Solorza > Wireless Systems Architect > 915-861-1390 > > On Tue, Mar 24, 2015 at 2:30 PM, Chuck McCown <[email protected]> wrote: > >> Probably different gain on the dishes from TX to RX. At least the >> AF24 has different gains. >> >> So, say 33 on each end. >> 16 miles is 141 dB at this frequency. >> -141+66+4=-71 dBm >> >> Might work. >> >> *From:* Jaime Solorza <[email protected]> >> *Sent:* Tuesday, March 24, 2015 2:16 PM >> *To:* Animal Farm <[email protected]> >> *Subject:* Re: [AFMUG] 10 GHz Ubiquiti radios >> >> Dish is about 33db..and Tx power was 4dBm... sensitivity is -97db... >> >> Jaime Solorza >> Wireless Systems Architect >> 915-861-1390 >> >> On Tue, Mar 24, 2015 at 1:56 PM, Chuck McCown <[email protected]> wrote: >> >>> I was thinking the same thing. 16 miles. Most radios want a 2 or 3 >>> foot dish on both ends minimum to do those lengths. But maybe it is a 1 >>> watt radio and a very quiet noise floor? One would hope UBNT could jump in >>> here and answer the question. >>> >>> *From:* Jerry Richardson <[email protected]> >>> *Sent:* Tuesday, March 24, 2015 1:31 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] 10 GHz Ubiquiti radios >>> >>> >>> My first though was “that’s a long shot” >>> >>> >>> >>> Second thought was “math is math…” so it would depend on the Tx power, >>> noise floor (probably non-existent), Rx sensitivity, and the antenna gain. >>> >>> >>> >>> Jerry R >>> >>> >>> >>> *From:* Af [mailto:[email protected]] *On Behalf Of *Jaime Solorza >>> *Sent:* Tuesday, March 24, 2015 9:45 AM >>> *To:* Animal Farm >>> *Subject:* Re: [AFMUG] 10 GHz Ubiquiti radios >>> >>> >>> >>> Thanks Mike for reading what I wrote....I know allot of folks think El >>> Paso is part of Mexico, even Texas treats us as a step child, but alas I am >>> in the US. This list is international and not US-only as far as I know. >>> The question was to those in other countries that might have used these >>> radios. As far as I know the 10GHz is allowed in Mexico under a licensing >>> process via CofeTel and SCT. I was hired to configure them and make sure >>> they "talked" to each other passed traffic before they go to customs and >>> get exported to Mexico. The integrator hired me due to recommendation from >>> the Syscom/Epcom distributors sales representative. >>> >>> I don't know about the conversion but case was huge! >>> >>> >>> >>> >>> Jaime Solorza >>> >>> Wireless Systems Architect >>> >>> 915-861-1390 >>> >>> >>> >>> On Tue, Mar 24, 2015 at 10:05 AM, Mike Hammett <[email protected]> wrote: >>> >>> He did say Maxico and Chihuahua... ;-) >>> >>> >>> >>> ----- >>> Mike Hammett >>> Intelligent Computing Solutions >>> http://www.ics-il.com >>> >>> >>> ------------------------------ >>> >>> *From: *"Kurt Fankhauser" <[email protected]> >>> *To: *[email protected] >>> *Sent: *Tuesday, March 24, 2015 11:03:03 AM >>> *Subject: *Re: [AFMUG] 10 GHz Ubiquiti radios >>> >>> What country are you in? Here in the US we can't use that band except >>> maybe under HAM radio operations so your not going to find very many people >>> that have used that radio... >>> >>> >>> >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >>> >>> >>> On Tue, Mar 24, 2015 at 11:58 AM, Jaime Solorza < >>> [email protected]> wrote: >>> >>> I configured a pair of 10GHz PTP Ubiquiti radios and 3 2.4GHz M2 with >>> sectors for a cement company outfit out of Mexico that is going to install >>> them in a canyon. >>> >>> I had never played with the 10GHz product before and it was same >>> interface as M5 pretty much. The box with dishes was good size. I didn't >>> take them out as the radios connected to each other on bench. >>> >>> What kind of distance can these radios provide? The integrator >>> installing the radios, cameras, UniFi and phones says they are going to >>> shoot from a tower on mountain to quarry about 16 miles down the canyon. >>> Can these work that far? >>> >>> I asked why they didn't use 5GHz and told me someone at Syscom in >>> Chihuahua recommended these for long distance. >>> >>> Any one use these before? >>> >>> Jaime Solorza >>> >>> Wireless Systems Architect >>> >>> 915-861-1390 >>> >>> >>> >>> >>> >>> >>> >> >> > >
