>From the release notes: So, looks like that is there. Software Release 13.4 is intended to support PMP 100, PTP 100, PTP 230, PMP 430, PMP 450, PTP 450. Please note that the PMP 400 is NOT supported New Features:
• Frame Utilization (PMP450 Only) • Security Banner • RADIUS CoA Support • RADIUS VSA for Zero Touch • Feature Request: OIDs for running Link Test from the SM • Allow Extrapolated Link Test • Display the time and date that the last link cap test was run New Features for PMP 100 • Sector SA • Read-Only Users (Local and Remote) • 20 Color Codes • Export Sessions Status • HTTPS, SNMPv3, Telnet, FTP • Zero Touch • Import/Export Configuration File Bug Fixes: • “Frequency = None” Fix • Alignment Tone, Phase 1 (Phase 2 will require a new FPGA) • Low UL throughput with 5ms frame • LBT ETSI improvement • Reboot not needed to change the SNMP Community String • allIpv4Filter > Object ID: 1.3.6.1.4.1.161.19.3.3.2.132 gets un-selected if the allipv6Filter is done afterwards • Bridging Table displays duplicate entries. • HTML not well-formed in AP web interface • linkstatus.cgi is broken • 13.3 Some PMP 450 AP's not displaying Frequency Carrier • PMP450 SM with Public IP Gets an IP from DHCP Server Above AP when Registered with ICC • PMP 450 Unexplained Watchdog Resets • Linktest UL Efficiency degrades on PMP430 SM's operating in Interop Mode • 3.5 Radios do not have the correct band edges when 7MHz is selected. • Malformed packets can cause radio to reboot • HTTPS Proxy Issues • PTP 450 registration issues if both sides do not match • SNMP Table whispBoxBridgeTable does not report all MAC addresses • False radar detection on 5.xGHz ETSI & FCC AP, in 10, 7, and 5 MHz Ch BW On Fri, Apr 17, 2015 at 10:29 AM, Matt <[email protected]> wrote: > This is super, I was afraid the FSK line saw its last firmware update > and we have so so many out there. Is the frequency NONE now supported > on FSK units? > > >>Frame Utilization (PMP450 Only) > > So we can now graph percent RF airtime utilization on 450 units? > Cool. Would be nice to have same thing with FSK. > > >>Security Banner > >>RADIUS CoA Support > >>RADIUS VSA for Zero Touch > > Neat. > > >>Feature Request: OIDs for running Link Test from the SM > >>Allow Extrapolated Link Test > > Super! So now I can do a weekly link test on every SM in system and > log results like we currently do for signal strength. Will the SNMP > commands be the same for 450 and FSK SMs? Would make it so much > easier. We are still 80 percent FSK and slowly moving to 450. > > Also, is there an SNMP command to make an SM do an AP Eval? Currently > only way I know is a reboot. > > >>Display the time and date that the last link cap test was run > > Handy. > > Any plans to fix the PTP230 session drop issues? >
