Seems to work well on 450. On FSK it seems to not give a valid result - getting 0's for capacity on known good links.
Mark > On Apr 17, 2015, at 5:12 PM, Rajesh Vijayakumar > <rajesh.vijayaku...@gmail.com> wrote: > > Matt, > The correct link for the "Extrapolated Link Test" is > http://community.cambiumnetworks.com/t5/PMP-Beta/PMP-13-4-Extrapolated-Link-Test-Feature-Brief/m-p/39964#U39964 > > Rajesh Vijayakumar > Cambium Networks > >> On Fri, Apr 17, 2015 at 4:03 PM, Rajesh Vijayakumar >> <rajesh.vijayaku...@gmail.com> wrote: >> >> Is the frequency NONE now supported on FSK units? >> Yes. >> >> >> Will the SNMP commands be the same for 450 and FSK SMs? >> They are same. Please see >> https://confluence.camnwk.com/display/CPY/Extrapolated+Link+Test >> >> >> Also, is there an SNMP command to make an SM do an AP Eval? >> It doesn't look like there is one, but I will double check. >> >> >>Any plans to fix the PTP230 session drop issues? >> >> 13.4 fixes a PTP230 crash. When the BHS crashes, it looks like a session >> drop at the BHM. Please try the beta. If you see any issue, please let us >> know at >> http://community.cambiumnetworks.com/t5/PMP-Beta/Beta-Software-Release-13-4-Build-7-is-available/m-p/39945#U39945 >> >> Rajesh Vijayakumar >> Cambium Networks >> >> >> >>> On Fri, Apr 17, 2015 at 11:29 AM, Matt <matt.mailingli...@gmail.com> wrote: >>> This is super, I was afraid the FSK line saw its last firmware update >>> and we have so so many out there. Is the frequency NONE now supported >>> on FSK units? >>> >>> >>Frame Utilization (PMP450 Only) >>> >>> So we can now graph percent RF airtime utilization on 450 units? >>> Cool. Would be nice to have same thing with FSK. >>> >>> >>Security Banner >>> >>RADIUS CoA Support >>> >>RADIUS VSA for Zero Touch >>> >>> Neat. >>> >>> >>Feature Request: OIDs for running Link Test from the SM >>> >>Allow Extrapolated Link Test >>> >>> Super! So now I can do a weekly link test on every SM in system and >>> log results like we currently do for signal strength. Will the SNMP >>> commands be the same for 450 and FSK SMs? Would make it so much >>> easier. We are still 80 percent FSK and slowly moving to 450. >>> >>> Also, is there an SNMP command to make an SM do an AP Eval? Currently >>> only way I know is a reboot. >>> >>> >>Display the time and date that the last link cap test was run >>> >>> Handy. >>> >>> Any plans to fix the PTP230 session drop issues? >