switch to wbmfg GigE-APC-HV surge suppressors and you'll most likely get ride of the errors ;-)
if not then you may need to run the ethernet lines in liquidtight conduit (with the metal inside)...that was my project today at a tower with an FM transmitter that was causing all kinds of problems :-/ got er fixed tho!!! -sean On Tue, Apr 21, 2015 at 3:44 PM, Eric Muehleisen <[email protected]> wrote: > 600SSD's > > On Tue, Apr 21, 2015 at 4:26 PM, Matt <[email protected]> wrote: > >> > A while back there was a thread about issues running CAT5 cables along >> the >> > entire length of solid steel tower legs. >> > >> > We've run into a problem where we can't run 100baseT reliably on a >> couple >> > APs. CRC errors will go away if we force the switch port to 10baseT. >> > Interestingly enough, packet loss amplifies when it rains. >> > >> > Any help would be appreciated. >> >> What kind of surge arrestors? We had same issue with 450 AP's using >> standard Cambium arrestors. Switching too GigE HV surge arrestors >> solved it. >> > >
