We just buy APC PRM4s and put a nice metal din rail mount on the back. It is screwed on. You could un screw it and mount it elsewhere.
I presume you have good drip loops that keep water from following the cables to the surge suppressors. From: Mike Hammett Sent: Sunday, May 10, 2015 7:45 AM To: Animal Farm Subject: [AFMUG] APC-DIN Mount It's hard to tell from the picture. Must the chassis be mounted to the DIN rail via the back of the chassis or can the mount be relocated to the top\bottom? I assume it can't be moved, but I'd like to mount it so that the ports of the surge suppressors are pointing down. Should any water enter the cable, gravity would take it back out of the connector, down the side of the cable instead out the back of the connector, down onto the next surge suppressor below it. I could just put a DIN rail at the top of the box, but just wondering if I could just use the same rail I'm using for everything else. No, it's not green cable and there shouldn't be any wear points, so I'm not really sure how it's getting in. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com
