We use a hubbell ps816 anchor which is 8" diameter and 66" long. 12k lb pull out rating I believe depending on soil. On May 10, 2015 11:50 AM, "Jaime Solorza" <[email protected]> wrote:
> 8 inch or 8 feet? No way I would erect a guyed tower with anchor buried > only 8 inches > > Jaime Solorza > On May 10, 2015 8:39 AM, "Chris Fabien" <[email protected]> wrote: > >> What's the soil like? We usually use earth anchors from a utility supply >> company (power line anchors). An 8" anchor should be enough for a 100ft >> rohn 25, if you can screw it in your soil by hand. >> >> On Sun, May 10, 2015 at 12:03 AM, Brandon Yuchasz <[email protected] >> > wrote: >> >>> Anyone ever use sonnet tubes drilled into the ground and then poured >>> full of concrete for guy wire anchor points? We have a 100’ rohn that we >>> just purchased. Two anchors are solid but the third is anchored on the top >>> of what could best be described as a stone and concrete pillar. The >>> concrete is all weather beaten and falling apart and if I push hard I can >>> move the entire pillar. It’s a hard location to get machinery into but I >>> can get a drilling machine in for putting in tubes. It can do a 16” tube >>> dia. >>> >>> >>> >>> Thoughts? >>> >>> >>> >>> Brandon >>> >>> >>> >> >>
