glad to hear TR-069 is supported. Any idea on when a 5Ghz version will be available? Comcast has pretty much screwed up 2.4Ghz :-/
On Sun, Jun 7, 2015 at 9:11 AM, Rajesh Vijayakumar < [email protected]> wrote: > Sean, > TR-069 is supported. > > Rajesh Vijayakumar > Cambium Networks > > On Sat, Jun 6, 2015 at 2:55 AM, Sean Heskett <[email protected]> wrote: > >> Hey Matt, >> >> when will a 5ghz version be available? >> >> does it have TR-069 compatibility? >> >> -sean >> >> On Fri, Jun 5, 2015 at 12:31 PM, Matt Mangriotis < >> [email protected]> wrote: >> >>> Also, Ken (and others), to save you the extremely arduous and devilishly >>> painful effort of filling out a form *gasp!* to get it... here's the spec >>> sheet. >>> >>> Matt >>> >>> -----Original Message----- >>> From: Af [mailto:[email protected]] On Behalf Of Matt Mangriotis >>> Sent: Friday, June 05, 2015 12:58 PM >>> To: [email protected] >>> Subject: Re: [AFMUG] Cambium discontinuing the traditional wall wart >>> powersupply >>> >>> Ken - >>> >>> There's some discussion and info on the C3VoIP-200 here: >>> >>> >>> http://community.cambiumnetworks.com/t5/WISP-Business/C3VoIP-Gateways-Models/td-p/39723/page/2 >>> >>> There will be a webinar on it on Tuesday, June 9th, also, so you can ask >>> questions live: http://www.cambiumnetworks.com/company/webinars >>> >>> Matt >>> >>> -----Original Message----- >>> From: Af [mailto:[email protected]] On Behalf Of Ken Hohhof >>> Sent: Friday, June 05, 2015 12:00 PM >>> To: [email protected] >>> Subject: Re: [AFMUG] Cambium discontinuing the traditional wall wart >>> powersupply >>> >>> Model just released has 802.11b/g/n with 2 external antennas, but yes >>> includes VoIP. >>> >>> I don't see a user guide on the Cambium website. I may have to order >>> one and play with it. We currently use Cisco ATAs in bridge mode ahead of >>> the customer router and give them a private IP completely separate from the >>> router. I'm not clear on whether this device will work in a similar manner. >>> Also our managed CPE routers are all Mikrotik and remotely managed via >>> Winbox, I assume this is probably OpenWRT based, we have had nothing but >>> bad experiences with every brand of home routers and I would approach any >>> new device with skepticism. You often don’t know you've deployed a bunch >>> of crap routers for a year or more when they start failing. >>> >>> That said, consolidating the POE, router and ATA functions in one box >>> would simplify the rats nest of wires. And the industry is moving toward >>> ISPs providing a WiFi router, DSL and cable is pretty much all that way. >>> >>> If everything else was good, and the price was right, I guess I wouldn't >>> sweat every customer having a phone jack on their "modem" even if 95% >>> didn't use it. Could save a future truck roll. Assuming remote management. >>> Depends on how much cost it adds. >>> >>> >>> -----Original Message----- >>> From: Matt >>> Sent: Friday, June 05, 2015 11:43 AM >>> To: [email protected] >>> Subject: Re: [AFMUG] Cambium discontinuing the traditional wall wart >>> powersupply >>> >>> > Mark, I guess you could look at the C3VOIP200 since it includes >>> > Canopy/ePMP compatible POE on the WAN port. >>> >>> I so wish they made a version of it with WIFI and without VOIP. >>> >>> >>> >>> > "Find the thin wire coming off the 1” block and follow that to the >>> > power supply." >>> > >>> > 9/10 times, the customer will argue with me that it doesn't run to >>> > anything because they can't find it in their mess of wires. Or that >>> > it runs to their router (because the Router power cord looks the same >>> > size) >>> > >>> > >>> > >>> > >>> > On 6/5/2015 10:27 AM, Mark Radabaugh wrote: >>> >> >>> >> Interesting. I always found it pretty easy to troubleshoot. >>> >> >>> >> On the back of the router find the 3” long flat black cable that goes >>> >> into >>> >> a 1” square black box. Is it plugged into the WAN port on the >>> router? >>> >> Oh - >>> >> you plugged that flat black cord into the wall jack? Swap the ends - >>> the >>> >> flat black cord goes in the router. Find the cord plugged into the >>> 1” >>> >> box >>> >> and follow that to the wall jack. Is it plugged in securely at both >>> >> ends? >>> >> Find the thin wire coming off the 1” block and follow that to the >>> power >>> >> supply. Is it plugged in and the green light on? No? Plug it in. >>> If >>> >> the >>> >> green light is on unplug the power supply and tell me if the light >>> >> goes out >>> >> right away. It fades away slowly? Then there is a break in the wire >>> >> between the power supply and the equipment outside? Oh - your >>> >> husband wacked that wire with his hedge trimmer? Yeah - that might >>> >> possibly be the problem. >>> >> >>> >> >>> >> Mark >>> >> >>> >> >>> >>> On Jun 5, 2015, at 11:10 AM, Nate Burke <[email protected]> wrote: >>> >>> >>> >>> We've been using the Tycon's for quite a while as well. We found it >>> >>> next to impossible to trouble shoot the Cambium power supply with a >>> >>> customer. >>> >>> They could never comprehend what it was, and always tried to plug in >>> >>> a PC to the POE Jumper. The Tycon's are nice, because you can >>> >>> describe the white box, with 2 plugs on one side (AC and LAN), and >>> >>> one plug on the other (poe). >>> >>> Is there a yellow or green light, The Cable from outside plugs into >>> >>> the end with only 1 plug. >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> On 6/5/2015 9:50 AM, Ken Hohhof wrote: >>> >>>> >>> >>>> I never used it anyway, prefer Tycon POE-24iR-CI. And yes, a patch >>> >>>> cord, but those come in various lengths and colors rather than the >>> >>>> short little stub which is limiting. >>> >>>> >>> >>>> >>> >>>> -----Original Message----- From: Mark Radabaugh >>> >>>> Sent: Friday, June 05, 2015 9:37 AM >>> >>>> To: [email protected] >>> >>>> Subject: [AFMUG] Cambium discontinuing the traditional wall wart >>> >>>> power supply >>> >>>> >>> >>>> So is anyone else unhappy with Cambium’s decision to EOL the >>> >>>> traditional power supply? >>> >>>> >>> >>>> The replacement part is a Ubiquiti or ePMP brick style. It costs >>> >>>> more, >>> >>>> does not include the power cord, and requires an additional CAT5 >>> >>>> jumper cable. >>> >>>> >>> >>>> While the current supply has it’s issues (hard to plug into a power >>> >>>> strip) it’s simple to troubleshoot over the phone with a customer >>> with >>> >>>> limited ways to screw it up. I think this is going to create more >>> >>>> ‘miswire’ service calls. >>> >>>> >>> >>>> >>> >>>> Mark >>> > >>> > >>> > >>> >>> >>> >> >
