Is this ptp or ptmp? Using eptp mode or tdd?
Only station? I've got an eptp link up that does 60 by 95 meg every test. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 4, 2015 5:50 PM, "Nate Burke" <[email protected]> wrote: > I've had a chance to work a little more with Speedtest.net and EPMP. No > matter what I do, I cannot get a speedtest above 20x5 over an EPMP link. > > I have an I3 server, setup with routing over EPMP (with Vlan) or Af5, OSPF > Controlling the routing. They are terminating into the same router at the > tower. The server stays on the same IP no matter which path is used. > > Quick Drawing > > Server > | > Mikrotik 1 > / \ > / Vlan 1001 > / \ > AF5 EPMP SM > | | > | | > AF5 EPMP AP (PMP) > \ / > \ Vlan1001 > \ / > Mikrotik 2 > | > To the Internet, and beyond! > > Over the AF5, I'm getting 90-100mb sync (Expected based on channel size). > When I switch the traffic to the EPMP, it maxes at 20x5. I have tried > Disabling QOS entirely in the EPMP AP, and there are no Queues setup in any > Mikrotik (and the Server IP Address is staying the same over each link) > The Wireless Link test from the EPMP SM to the AP reports 55x30. A > Mikrotik bandwidth test from 'The Internet' to the Mikrotik in front of the > server yields 50x12 over the EPMP. But every Speedtest.net run over the > EPMP only gets 20x5. > > I'm sure there's something I'm missing, I'm just not sure what. Since All > Customer's care about is what the speedtest.net number says, anyone know > what I am missing? > > Nate >
