We had similar problem with one customer, Darren in our office ended up visiting customer and playing with different settings. What worked was, changing the MTU setting from auto to 1480.
Tushar > On Aug 4, 2015, at 4:50 PM, Nate Burke <[email protected]> wrote: > > I've had a chance to work a little more with Speedtest.net and EPMP. No > matter what I do, I cannot get a speedtest above 20x5 over an EPMP link. > > I have an I3 server, setup with routing over EPMP (with Vlan) or Af5, OSPF > Controlling the routing. They are terminating into the same router at the > tower. The server stays on the same IP no matter which path is used. > > Quick Drawing > > Server > | > Mikrotik 1 > / \ > / Vlan 1001 > / \ > AF5 EPMP SM > | | > | | > AF5 EPMP AP (PMP) > \ / > \ Vlan1001 > \ / > Mikrotik 2 > | > To the Internet, and beyond! > > Over the AF5, I'm getting 90-100mb sync (Expected based on channel size). > When I switch the traffic to the EPMP, it maxes at 20x5. I have tried > Disabling QOS entirely in the EPMP AP, and there are no Queues setup in any > Mikrotik (and the Server IP Address is staying the same over each link) The > Wireless Link test from the EPMP SM to the AP reports 55x30. A Mikrotik > bandwidth test from 'The Internet' to the Mikrotik in front of the server > yields 50x12 over the EPMP. But every Speedtest.net run over the EPMP only > gets 20x5. > > I'm sure there's something I'm missing, I'm just not sure what. Since All > Customer's care about is what the speedtest.net number says, anyone know what > I am missing? > > Nate
