Lol. Locked and secured facility, armed guards, you don’t get into that room typically. Also, each customer has their own locked rack. So.. Not saying that’s not the case, but.. just weird. Just figured if there was something dumb to look for.. ☹
Dennis Burgess, CTO, Link Technologies, Inc. [email protected]<mailto:[email protected]> – 314-735-0270 x103 – www.linktechs.net<http://www.linktechs.net/> From: Af [mailto:[email protected]] On Behalf Of Lewis Bergman Sent: Wednesday, August 12, 2015 9:59 AM To: [email protected] Subject: Re: [AFMUG] PTP800 ethernet port up/down I don't know how the CMU's act now but I know the older versions of those would reboot if the case was grounded negative and it should have been positive. That doesn't make sense for a link that has been up for years but we did have one that someone had stuffed something metallic in our box and it happen to short the ground lug. At least that is what I remember. I could be full of crap too. On Wed, Aug 12, 2015 at 9:50 AM, Dennis Burgess <[email protected]<mailto:[email protected]>> wrote: I have a customer with a ptp800, been up for years, all of a sudden the Ethernet on our MT goes up down up down. They said they tried new cables, different ports, they also tried to use a MT SFP with a short fiber jumper to our MT as well, the fiber shows no link, but does show rx power of -41 (its a short 2 foot fiber jumper) … The big ulgy thing, is that they don’t have the password to it anymore, so now they are on the way to reset it, but was wondering if anyone else had any ideas why the Ethernet port would start going up/down or other troubleshooting suggestiongs. I do see the ODU sending 1000 Full only. Thanks, [DennisBurgessSignature] www.linktechs.net<http://www.linktechs.net/> – 314-735-0270 x103<tel:314-735-0270%20x103> – [email protected]<mailto:[email protected]> -- Lewis Bergman 325-439-0533 Cell
