X86 requires a license. Features aren't limited but number of tunnels and things. You could do the cheap $50 license.
Be aware the license is tied to the storage medium. If the disk goes bad you need another license. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 18, 2015 10:15 AM, "Chuck McCown" <[email protected]> wrote: > Are the tools part of the ROS? > Cost? > > *From:* Faisal Imtiaz <[email protected]> > *Sent:* Tuesday, August 18, 2015 8:10 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] GigE Testing > > A couple of quick thought for both of your.. Chuck & Forrest.. > > 1) Most folks overlook or not aware of the Packet Generator / Traffic > Generator tool in Mikrotik > http://wiki.mikrotik.com/wiki/Manual:Tools/Traffic_Generator > > http://wiki.mikrotik.com/wiki/Manual:Performance_Testing_with_Traffic_Generator > > > > 2) Most folks often forget that MT ROS is actually Software which will run > on most x86 machines... > i.e. you can load up the MT ROS on any PC hardware and get some of the > functionality needed. > > > :) > > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: [email protected] > > ------------------------------ > > *From: *"Chuck McCown" <[email protected]> > *To: *[email protected] > *Sent: *Tuesday, August 18, 2015 9:13:32 AM > *Subject: *Re: [AFMUG] GigE Testing > > I use something similar now. But only have one. And it is a bit slow. > Considering what Forrest is building. Will try the MT router initially > and see what happens. > > *From:* Jon Langeler <[email protected]> > *Sent:* Monday, August 17, 2015 8:15 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] GigE Testing > > This might be faster: http://www.t3innovation.com/netchaser > http://fetest.com/product/06-netprobe-2000-gige/ > > Otherwise next up is Fluke or JDSU > > Sent from my iPhone > > On Aug 17, 2015, at 3:51 PM, Chuck McCown <[email protected]> wrote: > > Demand for our GigE surge suppressor has been growing such that I am now > limited by my test station throughput. > > Any ideas on how to test a GigE device go-nogo without buying more big > dollar testers (which I currently use)? > > It needs to be fast and show speeds in both directions. > > Have considered just putting up a GigE switch and plugging the surge > suppressor into two ports and seeing if they light. But that sounds pretty > cheap and dirty. Want to see numbers. A laptop talking to another laptop > with iperf may end up being the solution. Not sure if there are GigE USB > NICS so I could do it all on one laptop or not. > > Any other ideas? > > >
