why not just have one router port for the BH and one router port for the AP? Are you trying to preserve layer 2 access to the AP in the case of router failure or something?
On Mon, Aug 17, 2015 at 8:07 PM, Jeremy <jeremysmi...@gmail.com> wrote: > I would say trunk port to the router and then breakout vlans on each port > in the switch. > > On Mon, Aug 17, 2015 at 6:43 PM, TJ Trout <t...@voltbb.com> wrote: > >> So say I have a 12port wisp switch and on that site my backhaul is from a >> airfiber and my access point is a rocket, what is the best/easiest way to >> setup a vlan to accomplish this? >> >> There is two ways I think, >> >> Method 1 would use 4 total ports on the wisp switch, 1 for the AF POE out >> and another to the router WAN, another for the rocket POE and a forth to >> the lan side of the router, advantage simple setup? Full throughput, >> disadvantage you take 4 ports. >> >> Method 2 would use 3 total ports on the wisp switch, 1 for AF, 1 for >> rocket and 1 trunk port to the router, the trunk port goes between the >> switch and router with 2 vlans, VLAN 100 for example would be wan to the AF >> and VLAN 200 would be lan to the rocket, advantage would be less utilized >> ports disadvantage would be sharing throughput on the single port (which >> won't be a problem in my scenario) >> >> Could someone give me a few hints on which one is better and maybe a hint >> so I can try to configure it myself? >> > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
