Not sure ... we used to put a paper in the box. Most folks know to put dish on tube etc. Not really sure what you are asking.
From: David Sovereen Sent: Wednesday, August 26, 2015 2:18 PM To: [email protected] Subject: Re: [AFMUG] Fwd: ePMP mounting Do you have installation instructions for these dishes? I don’t see any on your web site, but perhaps I’m looking in the wrong spot. Thanks, Dave On Aug 26, 2015, at 3:50 PM, <[email protected]> <[email protected]> wrote: We did a video years ago showing the pull out forces with several mounting methods. The stud is extremely important. The forceplate made the dish and mount stronger than the roof as I recall. From: Adam Moffett Sent: Wednesday, August 26, 2015 1:33 PM To: [email protected] Subject: Re: [AFMUG] Fwd: ePMP mounting If that's the WB SL, then that mount is too long for that size dish. To get that height tou'll need one with a stabalizer arm, or a tripod. Also the force required to pull out the lags will be 3x greater if you hit a stud. You might try lagging through the center holes on the mount into a rafter, then put in the 4 corner bolts just for stability. On 8/26/2015 2:50 PM, David Sovereen wrote: We are using WBMFG dishes with 2.4 GHz ePMP and are having problems where the lag bolts are coming out of the roofs during wind events. I inquired about the Force Plate and was told they don’t make it anymore. What are the rest of you doing for this, or are you using the smaller KP dish? I’ve been sticking with the WBMFG dish, even through awful availability problems, but perhaps its time to cut ties. Dave
