Yeah, it's probably sawzall time. But one thought comes to mind, I haven't
tried this, but what about lock fluid that is like penetrating oil with
graphite in it? I say that because some anti-seize compounds contain
graphite.
-----Original Message-----
From: Bill Prince
Sent: Friday, September 11, 2015 6:56 PM
To: [email protected]
Subject: Re: [AFMUG] Stainless Bolts
You're in trouble.
Might work to smear a little anti-seize on the threads (both sides).
Otherwise get out the hack saw or some armstrong.
bp
<part15sbs{at}gmail{dot}com>
On 9/11/2015 4:39 PM, Matt wrote:
Is there a spray that can be used to loosen stainless bolts that are
just starting to seize? They still turn a bit but I dared not try any
farther. Pre sprayed them with CRC silicone spray but they still
seized. Was wandering if there was something better then the silicone
spray I could use?
