The pigtails? What about doing it like a force 110 feedhorn? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2015 5:46 PM, "Chuck McCown" <ch...@wbmfg.com> wrote:
> The PCB edge launch connectors to mate with that are very expensive... > > *From:* Josh Luthman <j...@imaginenetworksllc.com> > *Sent:* Wednesday, September 16, 2015 3:40 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback? > > RPSMA? Ya > > Trango started it, Ubnt did it, Mikrotik kinda followed suit, ePMP does > it... > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Sep 16, 2015 at 5:39 PM, Chuck McCown <ch...@wbmfg.com> wrote: > >> ePMP connectors are reverse are they not? >> >> *From:* Josh Luthman <j...@imaginenetworksllc.com> >> *Sent:* Wednesday, September 16, 2015 2:31 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback? >> >> Right but not at all of us are replacing an FSK radio with a $200-400 >> radio...we're using a $99. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Sep 16, 2015 at 4:22 PM, George Skorup <geo...@cbcast.com> wrote: >> >>> I would just swap to a Force110 or 200 when it's available. We're doing >>> mostly 450, so redeploying the reflectors is easier. >>> >>> On 9/16/2015 3:13 PM, Josh Luthman wrote: >>> >>> Yes. Yes, plus the realign. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Wed, Sep 16, 2015 at 4:04 PM, Adam Moffett <dmmoff...@gmail.com> >>> wrote: >>> >>>> The PoE is compatible right? Does it take more than 5 minutes to swap >>>> dishes? >>>> >>>> >>>> On 9/16/2015 3:35 PM, Gino Villarini wrote: >>>> >>>> Also, the patch on the integrated epmp does not provide a good >>>> illumination to the Canopy Dish, What we need is the same patch that the >>>> 450 has... it works with all canopy dishes in the market... if we can >>>> achieve 23db gain,, it would be awesome! >>>> >>>> Many people will migrate from FSK to EPMP and the current process is >>>> not efficient at all >>>> >>>> On Wed, Sep 16, 2015 at 2:52 PM, Chuck McCown <ch...@wbmfg.com> wrote: >>>> >>>>> But you can put an integrated radio on our dishes. Isn’t the >>>>> integrated radio cheaper? >>>>> >>>>> *From:* Josh Luthman <j...@imaginenetworksllc.com> >>>>> *Sent:* Wednesday, September 16, 2015 12:47 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback? >>>>> >>>>> Is it a new customer? Force 110 with a connectorized radio >>>>> Is it a new customer that wants a reflector? Use the connectorized >>>>> radio >>>>> Is it a customer with Canopy+Dish? Use the connectorized radio >>>>> >>>>> Integrated radio would be for customers that are really close and >>>>> could hear multiple sectors. >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Wed, Sep 16, 2015 at 2:41 PM, Chuck McCown <ch...@wbmfg.com> wrote: >>>>> >>>>>> But why would you want to use the connectorized radio vs the epmp? >>>>>> >>>>>> *From:* Josh Luthman <j...@imaginenetworksllc.com> >>>>>> *Sent:* Wednesday, September 16, 2015 12:39 PM >>>>>> *To:* af@afmug.com >>>>>> *Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback? >>>>>> >>>>>> >>>>>> Enabling you to use the reflectors already there and simply swap >>>>>> radios would be fantastic. I'm sure there are many going from FSK to >>>>>> epmp. >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> On Sep 16, 2015 2:35 PM, "Chuck McCown" <ch...@wbmfg.com> wrote: >>>>>> >>>>>>> Oh, OK. I actually developed a small patch antenna for the >>>>>>> connectorized radio back when these first came out. I think it was for >>>>>>> you. Last winter or spring. >>>>>>> >>>>>>> The holdup was waiting for a tiny radome. I think I designed the >>>>>>> thermoform mold but never got any samples or something like that. Could >>>>>>> still finish that project I guess. >>>>>>> >>>>>>> *From:* Gino Villarini <ginovi...@gmail.com> >>>>>>> *Sent:* Wednesday, September 16, 2015 11:49 AM >>>>>>> *To:* af@afmug.com >>>>>>> *Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback? >>>>>>> >>>>>>> just to clarify, we DO NOT want a epmp integrated holder! check the >>>>>>> sketch >>>>>>> >>>>>>> On Wed, Sep 16, 2015 at 1:29 PM, Chuck McCown <ch...@wbmfg.com> >>>>>>> wrote: >>>>>>> >>>>>>>> We can do this. Whose dish and what frequency? >>>>>>>> We have a holder now for ePMP for our current dishes. It fits some >>>>>>>> of the others I think. >>>>>>>> >>>>>>>> Our older dishes had a D tube with a piece of bent conduit welded >>>>>>>> into it. The SM snapped into place. Hard to do some thing for them. >>>>>>>> >>>>>>>> Later we had the rectangular tubing with the claw snap fit. Our >>>>>>>> current ePMP holder should work with those. >>>>>>>> >>>>>>>> *From:* Gino Villarini <ginovi...@gmail.com> >>>>>>>> *Sent:* Wednesday, September 16, 2015 11:17 AM >>>>>>>> *To:* af@afmug.com >>>>>>>> *Subject:* [AFMUG] Product Idea for Chuck - Feedback? >>>>>>>> >>>>>>>> Chuck >>>>>>>> >>>>>>>> As we migrate Canopy to epmp, we find ourselves wishing for this: >>>>>>>> >>>>>>>> -Epmp holder for conn. epmp radio with illumination feedhorn for >>>>>>>> traditional dishes >>>>>>>> >>>>>>>> The idea would be that instead of replacing the whole canopy >>>>>>>> radio+dish with a Force110 unit, it would be more efficient to just >>>>>>>> remove >>>>>>>> the Canopy radio and reuse the dish with a conn. radio >>>>>>>> >>>>>>>> I think that we could pay $25-$30 for something like this. >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> >>> >> > >
