Right but not at all of us are replacing an FSK radio with a $200-400 radio...we're using a $99.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Sep 16, 2015 at 4:22 PM, George Skorup <[email protected]> wrote: > I would just swap to a Force110 or 200 when it's available. We're doing > mostly 450, so redeploying the reflectors is easier. > > On 9/16/2015 3:13 PM, Josh Luthman wrote: > > Yes. Yes, plus the realign. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Sep 16, 2015 at 4:04 PM, Adam Moffett <[email protected]> wrote: > >> The PoE is compatible right? Does it take more than 5 minutes to swap >> dishes? >> >> >> On 9/16/2015 3:35 PM, Gino Villarini wrote: >> >> Also, the patch on the integrated epmp does not provide a good >> illumination to the Canopy Dish, What we need is the same patch that the >> 450 has... it works with all canopy dishes in the market... if we can >> achieve 23db gain,, it would be awesome! >> >> Many people will migrate from FSK to EPMP and the current process is not >> efficient at all >> >> On Wed, Sep 16, 2015 at 2:52 PM, Chuck McCown < <[email protected]> >> [email protected]> wrote: >> >>> But you can put an integrated radio on our dishes. Isn’t the integrated >>> radio cheaper? >>> >>> *From:* Josh Luthman <[email protected]> >>> *Sent:* Wednesday, September 16, 2015 12:47 PM >>> *To:* <[email protected]>[email protected] >>> *Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback? >>> >>> Is it a new customer? Force 110 with a connectorized radio >>> Is it a new customer that wants a reflector? Use the connectorized radio >>> Is it a customer with Canopy+Dish? Use the connectorized radio >>> >>> Integrated radio would be for customers that are really close and could >>> hear multiple sectors. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Wed, Sep 16, 2015 at 2:41 PM, Chuck McCown < <[email protected]> >>> [email protected]> wrote: >>> >>>> But why would you want to use the connectorized radio vs the epmp? >>>> >>>> *From:* Josh Luthman <[email protected]> >>>> *Sent:* Wednesday, September 16, 2015 12:39 PM >>>> *To:* <[email protected]>[email protected] >>>> *Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback? >>>> >>>> >>>> Enabling you to use the reflectors already there and simply swap radios >>>> would be fantastic. I'm sure there are many going from FSK to epmp. >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> On Sep 16, 2015 2:35 PM, "Chuck McCown" < <[email protected]> >>>> [email protected]> wrote: >>>> >>>>> Oh, OK. I actually developed a small patch antenna for the >>>>> connectorized radio back when these first came out. I think it was for >>>>> you. Last winter or spring. >>>>> >>>>> The holdup was waiting for a tiny radome. I think I designed the >>>>> thermoform mold but never got any samples or something like that. Could >>>>> still finish that project I guess. >>>>> >>>>> *From:* Gino Villarini <[email protected]> >>>>> *Sent:* Wednesday, September 16, 2015 11:49 AM >>>>> *To:* <[email protected]>[email protected] >>>>> *Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback? >>>>> >>>>> just to clarify, we DO NOT want a epmp integrated holder! check the >>>>> sketch >>>>> >>>>> On Wed, Sep 16, 2015 at 1:29 PM, Chuck McCown < <[email protected]> >>>>> [email protected]> wrote: >>>>> >>>>>> We can do this. Whose dish and what frequency? >>>>>> We have a holder now for ePMP for our current dishes. It fits some >>>>>> of the others I think. >>>>>> >>>>>> Our older dishes had a D tube with a piece of bent conduit welded >>>>>> into it. The SM snapped into place. Hard to do some thing for them. >>>>>> >>>>>> Later we had the rectangular tubing with the claw snap fit. Our >>>>>> current ePMP holder should work with those. >>>>>> >>>>>> *From:* Gino Villarini <[email protected]> >>>>>> *Sent:* Wednesday, September 16, 2015 11:17 AM >>>>>> *To:* <[email protected]>[email protected] >>>>>> *Subject:* [AFMUG] Product Idea for Chuck - Feedback? >>>>>> >>>>>> Chuck >>>>>> >>>>>> As we migrate Canopy to epmp, we find ourselves wishing for this: >>>>>> >>>>>> -Epmp holder for conn. epmp radio with illumination feedhorn for >>>>>> traditional dishes >>>>>> >>>>>> The idea would be that instead of replacing the whole canopy >>>>>> radio+dish with a Force110 unit, it would be more efficient to just >>>>>> remove >>>>>> the Canopy radio and reuse the dish with a conn. radio >>>>>> >>>>>> I think that we could pay $25-$30 for something like this. >>>>>> >>>>> >>>>> >>>> >>> >> >> >> > >
