The PoE is compatible right? Does it take more than 5 minutes to swap
dishes?
On 9/16/2015 3:35 PM, Gino Villarini wrote:
Also, the patch on the integrated epmp does not provide a good
illumination to the Canopy Dish, What we need is the same patch that
the 450 has... it works with all canopy dishes in the market... if we
can achieve 23db gain,, it would be awesome!
Many people will migrate from FSK to EPMP and the current process is
not efficient at all
On Wed, Sep 16, 2015 at 2:52 PM, Chuck McCown <[email protected]
<mailto:[email protected]>> wrote:
But you can put an integrated radio on our dishes. Isn’t the
integrated radio cheaper?
*From:* Josh Luthman <mailto:[email protected]>
*Sent:* Wednesday, September 16, 2015 12:47 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback?
Is it a new customer? Force 110 with a connectorized radio
Is it a new customer that wants a reflector? Use the
connectorized radio
Is it a customer with Canopy+Dish? Use the connectorized radio
Integrated radio would be for customers that are really close and
could hear multiple sectors.
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Sep 16, 2015 at 2:41 PM, Chuck McCown <[email protected]
<mailto:[email protected]>> wrote:
But why would you want to use the connectorized radio vs the epmp?
*From:* Josh Luthman <mailto:[email protected]>
*Sent:* Wednesday, September 16, 2015 12:39 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback?
Enabling you to use the reflectors already there and simply
swap radios would be fantastic. I'm sure there are many going
from FSK to epmp.
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Sep 16, 2015 2:35 PM, "Chuck McCown" <[email protected]
<mailto:[email protected]>> wrote:
Oh, OK. I actually developed a small patch antenna for
the connectorized radio back when these first came out. I
think it was for you. Last winter or spring.
The holdup was waiting for a tiny radome. I think I
designed the thermoform mold but never got any samples or
something like that. Could still finish that project I
guess.
*From:* Gino Villarini <mailto:[email protected]>
*Sent:* Wednesday, September 16, 2015 11:49 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Product Idea for Chuck - Feedback?
just to clarify, we DO NOT want a epmp integrated holder!
check the sketch
On Wed, Sep 16, 2015 at 1:29 PM, Chuck McCown
<[email protected] <mailto:[email protected]>> wrote:
We can do this. Whose dish and what frequency?
We have a holder now for ePMP for our current dishes.
It fits some of the others I think.
Our older dishes had a D tube with a piece of bent
conduit welded into it. The SM snapped into place.
Hard to do some thing for them.
Later we had the rectangular tubing with the claw snap
fit. Our current ePMP holder should work with those.
*From:* Gino Villarini <mailto:[email protected]>
*Sent:* Wednesday, September 16, 2015 11:17 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* [AFMUG] Product Idea for Chuck - Feedback?
Chuck
As we migrate Canopy to epmp, we find ourselves
wishing for this:
-Epmp holder for conn. epmp radio with illumination
feedhorn for traditional dishes
The idea would be that instead of replacing the whole
canopy radio+dish with a Force110 unit, it would be
more efficient to just remove the Canopy radio and
reuse the dish with a conn. radio
I think that we could pay $25-$30 for something like
this.
