I lied here it is
- Three M3x6 screws and two M4x6 screws Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 6, 2015 at 12:21 PM, Josh Luthman <[email protected]> wrote: > DR-UPS40 is *NOT* 24vdc and 48vdc out. It's pretty much a relay that > enables charging batteries. > > ad-155c will do 120 or 220vac in, terminals for the batteries and 48vdc out > http://www.jameco.com/jameco/products/prodds/2146118.pdf > > DC 24v to 48v > Meanwell SD-200B-48 - maybe try RSD-200B-48 > > Both units use these brackets for DIN. You need to buy your own screws > (sorry I don't have that documented) > > > https://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_222148_-1 > > https://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_222173_-1 > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Oct 6, 2015 at 12:16 PM, Lewis Bergman <[email protected]> > wrote: > >> I am looking for something like the DR-UPS40, which is 24VDC but in 48V. >> I found a HEP-600C-48 but it also is a lot more expensive than I want. >> DIN or standard case is fine. Does anyone know of something to fit this >> bill? >> >> I found a couple of things from Altech, RLH, and a couple of others but >> none I have used before. >> >> -- >> Lewis Bergman >> 325-439-0533 Cell >> > >
