Probably not. Do you have any 802.3af or at injectors? They should work as well... at for sure, af should work too. On Oct 28, 2015 2:17 PM, "Josh Luthman" <[email protected]> wrote:
> I don't have a Cambium power supply =( > > Ports 1 and 4 on the injector are both 100 meg. Is it worth trying 2/3? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Oct 28, 2015 at 4:07 PM, Forrest Christian (List Account) < > [email protected]> wrote: > >> Does it get gigabit with the cambium power supply? >> >> Have you tried a different port on the injector? (To rule out a bad port >> somehow missed in testing here) >> On Oct 28, 2015 2:01 PM, "Josh Luthman" <[email protected]> >> wrote: >> >>> I have a PacketFlux SyncInjector Gigabit that goes to the 450i. It's >>> got a 48v power supply. There is no syncpipe, nor would anything work in >>> the lab. The test PC has two Intel gigabit NICs. >>> >>> My issue is that I can only get a 100 Mbit here. >>> >>> I have it set to generate sync right now and I can access it just fine. >>> If I have it set for autosync + free run I get some problems accessing the >>> device (ping works for a few seconds on, then off, web interface is not >>> responsive at all, CNUT flat out doesn't work). The ethernet link does not >>> go down/up with sync at all. >>> >>> Any other clues or things to look at? >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >> >
