No 802.3at switches/POEs...
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 28, 2015 at 4:34 PM, Forrest Christian (List Account) < [email protected]> wrote: > Probably not. > > Do you have any 802.3af or at injectors? They should work as well... at > for sure, af should work too. > On Oct 28, 2015 2:17 PM, "Josh Luthman" <[email protected]> > wrote: > >> I don't have a Cambium power supply =( >> >> Ports 1 and 4 on the injector are both 100 meg. Is it worth trying 2/3? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Oct 28, 2015 at 4:07 PM, Forrest Christian (List Account) < >> [email protected]> wrote: >> >>> Does it get gigabit with the cambium power supply? >>> >>> Have you tried a different port on the injector? (To rule out a bad >>> port somehow missed in testing here) >>> On Oct 28, 2015 2:01 PM, "Josh Luthman" <[email protected]> >>> wrote: >>> >>>> I have a PacketFlux SyncInjector Gigabit that goes to the 450i. It's >>>> got a 48v power supply. There is no syncpipe, nor would anything work in >>>> the lab. The test PC has two Intel gigabit NICs. >>>> >>>> My issue is that I can only get a 100 Mbit here. >>>> >>>> I have it set to generate sync right now and I can access it just >>>> fine. If I have it set for autosync + free run I get some problems >>>> accessing the device (ping works for a few seconds on, then off, web >>>> interface is not responsive at all, CNUT flat out doesn't work). The >>>> ethernet link does not go down/up with sync at all. >>>> >>>> Any other clues or things to look at? >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>> >>
