Negative. We took them out a few months back when fighting the same issue. We thought they might have been the cause. Obviously, it wasn't.
On a side note, I upgraded the link to beta 3.2rc2 immediately following another link-flap. After the upgrade, the slave radio linked at gigabit and the data pair 0 shows 29db SNR and has been rock solid. Whereas before it showed 16db SNR. We don't have any more rain in the forecast for a while, so we'll see what happens over the next few days. On Wednesday, November 18, 2015, Forrest Christian (List Account) < [email protected]> wrote: > Just curious, are there surge supressors anywhere in the circuit? > On Nov 18, 2015 8:51 AM, "Eric Muehleisen" <[email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');>> wrote: > >> We have a situation where an AirFiber is struggling to maintain a >> gigabit ethernet connection. It's right next to a FM antenna. We've >> replaced the ~75ft. patch cable with belden shielded CAT5 and shielded >> ends. We've replaced the cable a couple time now. It will run gigabit >> in good conditions, but as soon as it rains or snows, the link bounces >> between gig and 100meg. Both ends are shielded and bonded. >> >> My question is, I would like to replace the cable again but with >> tested factory made outdoor shielded CAT5e or CAT6 at 75ft. I cannot >> seem to find a quality outdoor rated STP cable at custom lengths that >> is at least 24AWG solid wire. >> >> If anyone can make a recommendation, that would be great. >> > -- Sent via mobile
