The ones coming back in from the field have, so far, had the larger phillips screw in the bottom that puts more pressure on the front of the case. But - we have also seen new out of box ones coming in cracked the same way.
So far we have returned at least 2 with water damage to Cambium under RMA’s. Mark > On Nov 22, 2015, at 9:26 AM, George Skorup <[email protected]> wrote: > > The screw thing is the two that fastens the bottom port/ID label thing on. > The larger screw heads would stick up a bit too far and not allow the cap to > be locked. I've fixed many by tightening those a bit as suggested and it > works fine. Probably had 80-90 of those so far. This one has one of the > normal torx screws and one phillips head holding the bottom on. Got maybe > 10-20 like that. And the phillips head screw isn't on the side with the > cracks in the front cover of this one. So... I don't have a clue how this is > happening. > > On 11/21/2015 4:12 PM, Ken Hohhof wrote: >> Wasn’t there a thread about screw heads sticking up and Cambium saying to >> just torque them down? Could the factory have used the wrong screws? >> >> From: George Skorup <mailto:[email protected]> >> Sent: Saturday, November 21, 2015 3:38 PM >> To: [email protected] <mailto:[email protected]> >> Subject: [AFMUG] 3GHz 450 SM cases >> >> Somehow we ended up with a small handful of these. Always in that spot and I >> have no idea why. They're obviously going to leak. I'm betting Cambium won't >> cover them under warranty either (and I don't blame them), but we did end up >> with one or two that came this way new out of the box. This one I think one >> of the guys stupidly tossed on the shelf in the truck. They're not worth >> sending in for repair. I'll just wait until one is murdered beyond repair by >> lightning and steal the cover. But I thought I'd ask this anyway... can we >> get these covers anywhere so I can just fix them myself? >> >> <Mail Attachment.jpeg> >
