Hi George, The apostrophe in the device name has been fixed and is included in the latest release.
Dan Sullivan ePMP Software Manager From: Af [mailto:[email protected]] On Behalf Of Sriram Chaturvedi Sent: Friday, December 04, 2015 12:42 PM To: [email protected] Subject: Re: [AFMUG] Force 110 Sorry, a couple of typos. I meant to say the look and feel won’t change much as all the work is being done on the underlying GUI engine to improve performance and stability. Thanks, Sriram Join the Conversation Cambium Networks Community Forum<http://community.cambiumnetworks.com> On Dec 4, 2015, at 12:35 PM, Sriram Chaturvedi <[email protected]<mailto:[email protected]>> wrote: Hi Steve, We have been prioritizing radio performance over the GUI for a very long time. But, like Josh indicated, we made some incremental improvements in GUI performance in 2.4 and 2.5 releases but we are fully aware its not enough. The team has been working on a wholesale rework of the GUI engine (not as much as the look and feel) and we hope to have significant GUI performance gains in a Q1 release. We want to make sure it works on a PC, netbook, mobile etc. with all kinds of processor and memory configurations. We have been receiving tremendous feedback on use cases and performance pains seen my many folks on here and we’re taking all this input and working through them carefully. So keep the feedback (as negative as they can be) coming, on the GUI performance. All I can ask at this time is your patience and support. Thanks, Sriram Join the Conversation Cambium Networks Community Forum<http://community.cambiumnetworks.com/> On Dec 4, 2015, at 12:25 PM, Josh Luthman <[email protected]<mailto:[email protected]>> wrote: It does seem slightly better in 2.5.1 than what it did in 2.3, but there is a good bit of room for speed improvements. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Dec 4, 2015 at 1:22 PM, George Skorup <[email protected]<mailto:[email protected]>> wrote: I can deal with the GUI being stupid and slow because the performance is better than UBNT On 12/4/2015 12:11 PM, That One Guy /sarcasm wrote: the biggest complaint i have is that rather than just loading the components on the page you are on, it loads the entire webserver and only displays the components of that page, very inefficient Im lazy too, I like a site survey option, it makes life easier for techs to not have to know every possible essid fsk and 450 make me happy On Fri, Dec 4, 2015 at 12:07 PM, Josh Baird <[email protected]<mailto:[email protected]>> wrote: What are your problems? On Fri, Dec 4, 2015 at 1:06 PM, Adam Moffett <[email protected]<mailto:[email protected]>> wrote: I wish a GUI glitch was the worst of my problems. On 12/4/2015 12:57 PM, That One Guy /sarcasm wrote: The more We are using EPMP the more i wish the radios had a face so i could punch it in the face On Thu, Dec 3, 2015 at 7:35 PM, George Skorup <[email protected]<mailto:[email protected]>> wrote: Yes. You cannot have single quotes in the device name. I tried that once and the radio acted really stupid. None of the config would display. For example, I changed it from "Bob's House" to "Bobs House" and it was sane again. Almost the same thing on Canopy, just a little bit smarter about it. It won't even let you put a ' in the SNMP site name field. It just reverts back to the No Site Name default. On 12/3/2015 7:29 PM, Mike Hammett wrote: I think it was related to a single quote ' in some of the fields of the config. I dumped the config, edited them out and now it seems to be fine. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com<http://www.ics-il.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL> Midwest Internet Exchange http://www.midwest-ix.com<http://www.midwest-ix.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix> ________________________________ From: "Josh Luthman" <[email protected]><mailto:[email protected]> To: [email protected]<mailto:[email protected]> Sent: Thursday, December 3, 2015 6:44:54 PM Subject: Re: [AFMUG] Force 110 Never had a problem, but keep in mind I use one PC to update from shipped firmware to latest and then slap on a template. Then I use the laptop in the truck to do everything else on site. Josh Luthman Office: 937-552-2340<tel:937-552-2340> Direct: 937-552-2343<tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Dec 3, 2015 at 7:33 PM, Mathew Howard <[email protected]<mailto:[email protected]>> wrote: I saw something like that happen, but it went back to normal after I reloaded the interface... or maybe I had to reboot it, I don't remember for sure. On Thu, Dec 3, 2015 at 6:31 PM, Mike Hammett <[email protected]<mailto:[email protected]>> wrote: Have any of you seen where most of a Force 110's setting fields are blank when you login and when you go to save it after entering everything, it wants to reboot to the 192.168.0.2 address? That's clearly not what I have entered, but that's what it wants to use. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com<http://www.ics-il.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL> Midwest Internet Exchange http://www.midwest-ix.com<http://www.midwest-ix.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix> -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
