I have been using the SDR120-48's on our Backhauls for over a year now and none have failed. Knock on wood... I wanted to see if anyone else was using the 24's with success.
On Wed, Dec 16, 2015 at 4:01 PM, Lewis Bergman <[email protected]> wrote: > We hadn't any issue with the din rail mwanwell's we used. > > On Wed, Dec 16, 2015, 3:34 PM Jaime Solorza <[email protected]> > wrote: > >> hope they hold up for you...I only know of Meanwell from users on list. >> >> Jaime Solorza >> Wireless Systems Architect >> 915-861-1390 >> >> On Wed, Dec 16, 2015 at 2:25 PM, Sam Lambie <[email protected]> wrote: >> >>> For now, I am going with the Meanwells. The Puls are out of our budget >>> at the moment. Thanks for the info Jaime. >>> >>> On Wed, Dec 16, 2015 at 2:18 PM, Jaime Solorza < >>> [email protected]> wrote: >>> >>>> i did mention to Sam I Am that the Puls are pricey.....as are Phoenix >>>> Contact.....he could use Idec...acceptable lower cost.... >>>> >>>> Jaime Solorza >>>> Wireless Systems Architect >>>> 915-861-1390 >>>> >>>> On Wed, Dec 16, 2015 at 1:20 PM, George Skorup <[email protected]> >>>> wrote: >>>> >>>>> I still have many sites on regular old AC UPS's and AC-DC DIN rail >>>>> power supplies plugged into them. Works fine, until the UPS takes a shit. >>>>> Then I just convert to a DC UPS. That's the nice thing with the Traco >>>>> BCMU360, you can keep your existing power supply, as long as it's enough >>>>> to >>>>> run the load + 12-15W for maintaining the battery. >>>>> >>>>> But anyway, I used a lot of Phoenix Contact TRIO power supplies (like >>>>> 20+) and only one ever died because it was hit with 13kV when the primary >>>>> came down on top of the secondaries feeding the building. :( Those are >>>>> pretty expensive, so I started buying Mean Well SDR120-24's and so far >>>>> those have been working without an issue. >>>>> >>>>> You can't go wrong with an industrial power supply, as long as it >>>>> isn't a POS. I consider most Mean Well stuff to be pretty cheap, but >>>>> they've proven to not be garbage. >>>>> >>>>> On 12/16/2015 1:35 PM, Josh Baird wrote: >>>>> >>>>> Traco TSP series. If you need battery backup, throw in a BCM module. >>>>> >>>>> On Wed, Dec 16, 2015 at 2:22 PM, Sam Lambie <[email protected]> >>>>> wrote: >>>>> >>>>>> Who is using what and why? >>>>>> The power supplies that Packetflux sells, seems to burn out after >>>>>> about a year at the most inconvenient times. I am looking for something >>>>>> more robust. >>>>>> Currently, I am using Meanwell SDR120-48 for the bigger devices >>>>>> (Backhauls and 430 AP's) but am looking for something a bit more reliable >>>>>> in 24vdc. >>>>>> >>>>>> -- >>>>>> -- >>>>>> *Sam Lambie* >>>>>> Taosnet Wireless Tech. >>>>>> 575-758-7598 Office >>>>>> www.Taosnet.com <http://www.newmex.com> >>>>>> >>>>> >>>>> >>>>> >>>> >>> >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> >> -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
