I forgot to add... on the Gigabit Syncinjector, for longer cable runs, you need the I0 revision or later. I don't want to re-has the reasons for this, but I'm confident in this solution at this point.
-forrest On Tue, Dec 22, 2015 at 2:15 AM, Forrest Christian (List Account) < [email protected]> wrote: > So, let me clear up the details: > > The 450i power on and will work on pretty much any non-pair-swapped > injector that provides 48V or 56V with a correct amount of power (i.e. > wattage). Whatever polarity (it doesn't care). > > If you need to use PoE out on the supplemental aux out you'll want/need to > use an injector which can provide power on all 4 pairs. > > If you need to sync your radios you have several options: > > If 10/100 is acceptable to you: > 1) A CMM4, with the CMM set to 430 mode, and the external 'pair swap' > cable described in the cambium manual. > 2) A PacketFlux 320/430 syncinjector, with the pair swap cable described > in the cambium manual > 3) For short cable runs (only) a PacketFlux 10/100 injector powered from > 48V (and no more than 52V), with normal CAT5 cables. > > If you want Gigabit Connectivity: > 4) A PacketFlux Gigabit Syncinjector with normal CAT5 cables. > > If you want sync over the timing port: > 5) Cambium uGPS > 6) A Revision I or later PacketFlux SyncBox 12 (shipping soon). > > (There are some smaller than 12 port sync solutions on the roadmap.) > > I am not familiar with the CTM functionality as far as sync at 48VDC. It > MAY be available. Ask last mile gear. > > -forrest > > On Mon, Dec 21, 2015 at 9:02 AM, Justin Marshall <[email protected]> > wrote: > >> Hi, >> >> >> >> Does anyone happen to know offhand what power supply is needed for the >> 900Mhz 450 AP? >> >> >> >> Only thing google seems to have a definitive answer on (maybe I’m missing >> it) is the SM needing 30V, and the back of the AP itself says 55V / 1.1A >> >> >> >> Thanks >> >> Justin >> >> [email protected] >> >> >> > > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > > -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> <http://twitter.com/@packetflux>
