Don't forget to reboot the unit after making the queue changes. Also I would suggest to reach out to Brian Vargas @ Balticnetworks and see if they have any suggestions and or if they can replicate what you are seeing.
Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] ----- Original Message ----- > From: "Ken Hohhof" <[email protected]> > To: [email protected] > Sent: Saturday, January 2, 2016 11:27:45 PM > Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet links > I thought about the first part but didn't try it, I'll try it on the lab > router tomorrow. > > No, I don't see anything reported in the stats, as far as they are > concerned, everything is good. > > > -----Original Message----- > From: Faisal Imtiaz > Sent: Saturday, January 02, 2016 10:17 PM > To: [email protected] > Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet > links > > Try something.... > > change the interface queue to multi-queue-Ethernet-default > and increase the queue size packet buffer for it. (it should be mq pfifo) > > Do you see errors / packet loss being reported in the stats ? > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: [email protected] > > ----- Original Message ----- >> From: "Ken Hohhof" <[email protected]> >> To: [email protected] >> Sent: Saturday, January 2, 2016 8:09:46 PM >> Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet >> links > >> I downgraded to 6.25 and still saw the problems. >> >> I don't really want to go back any farther, likely the issue started with >> the new kernel and drivers when 6.x first came out. I figure if I can't >> run >> any of the recent versions, I might as well go back to 5.26. Unless >> someone >> knows of a specific cause and how to fix it. >> >> >> >> -----Original Message----- >> From: Kevin Radunz >> Sent: Friday, January 01, 2016 1:32 PM >> To: [email protected] >> Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet >> links >> >> I think some weard problems started around 6.33. There are posts of >> different topics about things like Winbox and VPN traffic not working but >> traffic through the device was fine. Some thought MTU changes but I'm not >> sure I saw concrete fixes. I know earlier versions don't do this. >> >> >>> I recently upgraded one of those RouterMaxx 1106 routers from 5.2 to >>> 6.33.1 >>> (I actually configured a new router and swapped hardware). Ever since, I >>> have had performance problems with a couple ports that are connected to >>> radios with 100M Ethernet ports. The most obvious symptom is that Winbox >>> won't stay connected or can't download plugins, but I also see pings >>> dropped >>> even to the directly connected equipment. >>> >>> I was a bad boy making multiple changes at once, so I've been gradually >>> walking them back in the lab on the original router, I upgraded it to >>> 6.33.1 >>> and the problem appeared. I dropped back to 6.31 and it was still there, >>> but when I dropped back to 5.26 everything was fine again. I haven't >>> tried >>> earlier 6.x versions yet, 6.31 is the oldest x86 version I have handy. >>> This >>> is not a radio problem, I can reproduce it with a directly connected >>> laptop >>> if I force the laptop NIC to 100M FDX. >>> >>> Is anyone familiar with this problem? I can't find anything on the >>> Mikrotik >>> forums. I guess I can live with 5.26 if I have to, but I'd like to know >>> what is causing this. Do I just need to change some configuration >>> parameter? I know 6.x brought out hardware only queues, but I think >>> that's >>> for Routerboards, not x86. Is there a problem with the Intel NIC drivers >>> included with 6.x? Any chance that an earlier or later version of 6.x >>> will >>> work for me? I see nothing in the change logs about it.
