Are u using the new version of winbox ? i.e. ver 3.0 ? there are issues with older version of the Winbox too.
Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] ----- Original Message ----- > From: "Ken Hohhof" <[email protected]> > To: [email protected] > Sent: Sunday, January 3, 2016 4:03:22 PM > Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet links > I tried multi-queue Ethernet default and it didn't work, even with queue > size increased to 500 packets. > > 5.26 still works fine. Best way to see problem is to clear Winbox cache so > it has to download plugins. > > > -----Original Message----- > From: Faisal Imtiaz > Sent: Sunday, January 03, 2016 11:02 AM > To: [email protected] > Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet > links > > Don't forget to reboot the unit after making the queue changes. > > Also I would suggest to reach out to Brian Vargas @ Balticnetworks and see > if they have any suggestions and or if they can replicate what you are > seeing. > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: [email protected] > > ----- Original Message ----- >> From: "Ken Hohhof" <[email protected]> >> To: [email protected] >> Sent: Saturday, January 2, 2016 11:27:45 PM >> Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet >> links > >> I thought about the first part but didn't try it, I'll try it on the lab >> router tomorrow. >> >> No, I don't see anything reported in the stats, as far as they are >> concerned, everything is good. >> >> >> -----Original Message----- >> From: Faisal Imtiaz >> Sent: Saturday, January 02, 2016 10:17 PM >> To: [email protected] >> Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet >> links >> >> Try something.... >> >> change the interface queue to multi-queue-Ethernet-default >> and increase the queue size packet buffer for it. (it should be mq pfifo) >> >> Do you see errors / packet loss being reported in the stats ? >> >> Regards. >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >> >> ----- Original Message ----- >>> From: "Ken Hohhof" <[email protected]> >>> To: [email protected] >>> Sent: Saturday, January 2, 2016 8:09:46 PM >>> Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet >>> links >> >>> I downgraded to 6.25 and still saw the problems. >>> >>> I don't really want to go back any farther, likely the issue started with >>> the new kernel and drivers when 6.x first came out. I figure if I can't >>> run >>> any of the recent versions, I might as well go back to 5.26. Unless >>> someone >>> knows of a specific cause and how to fix it. >>> >>> >>> >>> -----Original Message----- >>> From: Kevin Radunz >>> Sent: Friday, January 01, 2016 1:32 PM >>> To: [email protected] >>> Subject: Re: [AFMUG] Mikrotik x86 and ROS 6.x problems on 100M Ethernet >>> links >>> >>> I think some weard problems started around 6.33. There are posts of >>> different topics about things like Winbox and VPN traffic not working but >>> traffic through the device was fine. Some thought MTU changes but I'm >>> not >>> sure I saw concrete fixes. I know earlier versions don't do this. >>> >>> >>>> I recently upgraded one of those RouterMaxx 1106 routers from 5.2 to >>>> 6.33.1 >>>> (I actually configured a new router and swapped hardware). Ever since, >>>> I >>>> have had performance problems with a couple ports that are connected to >>>> radios with 100M Ethernet ports. The most obvious symptom is that >>>> Winbox >>>> won't stay connected or can't download plugins, but I also see pings >>>> dropped >>>> even to the directly connected equipment. >>>> >>>> I was a bad boy making multiple changes at once, so I've been gradually >>>> walking them back in the lab on the original router, I upgraded it to >>>> 6.33.1 >>>> and the problem appeared. I dropped back to 6.31 and it was still >>>> there, >>>> but when I dropped back to 5.26 everything was fine again. I haven't >>>> tried >>>> earlier 6.x versions yet, 6.31 is the oldest x86 version I have handy. >>>> This >>>> is not a radio problem, I can reproduce it with a directly connected >>>> laptop >>>> if I force the laptop NIC to 100M FDX. >>>> >>>> Is anyone familiar with this problem? I can't find anything on the >>>> Mikrotik >>>> forums. I guess I can live with 5.26 if I have to, but I'd like to know >>>> what is causing this. Do I just need to change some configuration >>>> parameter? I know 6.x brought out hardware only queues, but I think >>>> that's >>>> for Routerboards, not x86. Is there a problem with the Intel NIC >>>> drivers >>>> included with 6.x? Any chance that an earlier or later version of 6.x >>>> will > >>> work for me? I see nothing in the change logs about it.
