Ok, I think this might be their problem. They are back in office tomorrow so I’ll see if I can get their config instead of status page.
I’ll do a BGP print from my mikrotik as well tomorrow to make sure. Dennis from LinkTechs is doing my config, so I’m sure it will be configured correctly once we get past stage one, lol! From: Af [mailto:[email protected]] On Behalf Of Erich Kaiser Sent: Sunday, January 17, 2016 2:27 PM To: [email protected] Subject: Re: [AFMUG] BGP 32 Bit RouterOS AS Accept? 32 bit BGP AS works fine between Mikrotik and Brocade MLXe. They have a config issue. Have them send you running-config pertaining to your session. Also post your config. Erich Kaiser North Central Tower [email protected]<mailto:[email protected]> Office: 630-621-4804 Cell: 630-777-9291 [https://docs.google.com/a/northcentraltower.com/uc?id=0B12mNmVrr3-PbU1UMFk0OUFhOGs&export=download] On Sun, Jan 17, 2016 at 3:12 PM, Faisal Imtiaz <[email protected]<mailto:[email protected]>> wrote: post your bgp config pls. Also, why are they using next hop self = yes. and based on what you posted on the MT Forum (it is not the config, more of a status ..) would indicate that Their side is complaining about your ASN. :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232<tel:305%20663%205518%20x%20232> Help-desk: (305)663-5518<tel:%28305%29663-5518> Option 2 or Email: [email protected]<mailto:[email protected]> ________________________________ From: "Sterling Jacobson" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Sunday, January 17, 2016 3:53:00 PM Subject: Re: [AFMUG] BGP 32 Bit RouterOS AS Accept? This is what I see. I posted their config in this mikrotik post here: http://forum.mikrotik.com/viewtopic.php?f=14&t=103924 I appreciate your help. It’s got to be something simple on their end or my end. I have nearly the same config set up on another 1072 to another peer and it enteres the accept state with the same ASN. So I’m still leaning towards it being their Brocade. From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Josh Reynolds Sent: Saturday, January 16, 2016 11:16 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] BGP 32 Bit RouterOS AS Accept? Enable BGP logging in Mikrotik, this should give you better detail. Make sure the info you get back in the log is correct (that they have your AS set right), and double check your config. On Jan 16, 2016 7:19 PM, "Sterling Jacobson" <[email protected]<mailto:[email protected]>> wrote: I'm running one of those new fancy routerboard CCR 1072 routers on RouterOS 6.33.1. If I use my 32 bit BGP AS number the remote says Bad Remote AS. If I fake one around 65010 then it establishes a connection. Is this my problem or theirs? They are using Brocade MLXe code 5.8. Anyone else established a succesfull BGP with 32 bit AS number on routeros? Just want to try and narrow this down before I blame their Brocade for being complete junk, hahaha!
