is that auto ip ilias thing causing this, if the cdp and other tickbox are deselected you shouldnt be seeing any ips i dont thing
On Wed, Jan 20, 2016 at 11:42 AM, CBB - Jay Fuller < [email protected]> wrote: > > here is the station list. again, the file we have show her radio as > 10.8.19.56 ; not 106. We show she has a router at 106 > > > ----- Original Message ----- > *From:* CBB - Jay Fuller <[email protected]> > *To:* Ubiquiti Users Group <[email protected]> ; [email protected] ; > [email protected] > *Sent:* Wednesday, January 20, 2016 11:40 AM > *Subject:* weird ap-repeater setup issue with 5.6.3 firmware > > > as many of you know, we've been going to 5.6.3 > today we got a call from a customer who reported she is down. > investigating, we discovered she is on a 900 mhz ubnt access point setup > as an ap-repeater. > This problem started after the firmware upgrade so we are assuming it's > firmware related or perhaps > something is treated differently in 5.6.3 (for example, we also had to > update all of our oid's for graphing purposes) :) > > suggestions? > > > > we noticed no "transparent bridge" mode on an ap repeater, and we also > noticed the station is showing connected, but it is showing the IP address > of the customer's bridged router ; NOT the ip address of the radio. > > I have also tried checking the "auto" box briefly ; it did not change > access to the radio. > > I can not access the radio although it shows connected. > > > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
